Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Load Calculation
[ 9 Answers ]
I have a 100 amp switchbox.The left side has 6 slots ( 1 double switch 20amp, 1 double bar 30amp and 2 single 20amp. The right side has 3 double switch midgets at 20amps and 2 single 20amps. My question is how much can my box take and how do I calculate the usage?
Load calculation
[ 1 Answers ]
There is a indoor pool and normally water is heated to temp 40 deg c. Total water quantity is 15000 ltrs. Out door temp is 44 deg c. The indoor a/c results in high amount of condensataion in supply grilles. FCUs are used to cool the area with 10% of fresh air. There is no possibility of untreated...
Load calculation
[ 2 Answers ]
Respected sir I amprakash ihave doubt regarding load calculation. I have a 5 amp socket (ups power ) .can I connect 5 computors to that socket through extension box.please explain me any body knows
How am I going to size my 3 phase X'mer with 1 phase load using current as reference
[ 3 Answers ]
Hi, I'm Peping: I have 90 pieces of single phase loads with current of 2 Amperes. This will be loaded to a 3 phase transformer, Wye connected having a line to line voltage of 220 Volts. What will be the size of the transformer required for the mentioned loads? Many thanks, Peping
Load calculation
[ 1 Answers ]
Hi Please advise me what are the factors considered for calculating the Tonnage Rate whilst selecting the AC units for Industry / office environment. Regards Pankaj View more questions Search
|