Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Toilet Flange
[ 1 Answers ]
I'm remodeling my bathroom. I've removed the old toilet and dug up the old flooring and subflooring. Together they were about 7/8" in thickness. Since I will now have a lower floor, what do I do to put in a new toilet flange? The old one was brass and only 1/4" thick and simply had the drain...
Toilet flange
[ 1 Answers ]
Hello, I realized as I was installing the subfloor in my new bathroom that I had cut off the pvc to short. It is slightly lower that the subfloor. Is there a longer flange which will solve this problem or should I remove the floor add a coupling and more pvc to raise the height? Thanks, m2
Toilet Flange
[ 1 Answers ]
I have a 4" PVC pipe with a metal flange that originally appears to have been secured to the concrete floor with concrete nails. The nails have rusted through and out and the concrete is a bit broken up underneath the flange. Is there something I can "Inject" into the space under the flange where...
Toilet flange too low
[ 1 Answers ]
I discovered a leak in the base of the upstairs toilet that had soaked the subfloor and cause the tile to come loose. I removed the tile and discovered that it had been set on a plywood backer. I removed the plywood and cut out the rotting wood around the toilet. This exposed the ABS plumbing...
Toilet flange
[ 5 Answers ]
I am in the process of re-settin my toilet, It is located in the basement and the toilet flange sits on top of the ceramic tile. It is not flush with the tile. I have reset the toilet three times using various thickness of wax. These only last so long. I have purchased a wax free bowl gasket... View more questions Search
|