Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Flapper arm
[ 19 Answers ]
It seems like the flapper arm is sticking up but I can't figure out why. Also I notice my toilet is flushing twice, what to do about that. Thanks a lot guys
Gas line & dryer vent pipe - how close is too close?
[ 1 Answers ]
I'm rerouting the gas dryer vent piping so that it will inside the adjoining stud wall. At the top of the wall the vertical exhaust pipe will be within an inch or two of the horizontal running copper gas supply line. Question - is there a minimum distance that the metal dryer exhaust pipe must...
Flapper on Toilet - fixed it, but still have a ?
[ 2 Answers ]
OK, I'm putting on my plumbing cap today! One of our toilets was constantly making a running water sound. When I opened it up, it appeared to me that the Flapper was very old and that was where the water was leaking into. I replaced the new flapper successfully (it was pretty easy! ) and now the...
Flapper closes to soon
[ 4 Answers ]
I have a low flush toilet that has a problem. When you flush it instead of pushing the handle down and walking away you have to stand there and wait for the water to drain. I took the tank top off and looked in side. This is the kind of toilet that has the floater that is a cylinder on the input...
Flapper is it easy to install
[ 1 Answers ]
Is a flapper easy to install or should a plumber do this procedure? View more questions Search
|