Ask Experts Questions for FREE Help !
Ask
    shortstuff001's Avatar
    shortstuff001 Posts: 16, Reputation: 1
    New Member
    		  
    #1

    Feb 13, 2009, 12:02 AM
    Formula For copper (II) sulfide
    What is the formula for copper(II)sulfide? And why? Same with lead(II)bromide I'm not understanding why CuS isn't Cu2S (2 is sub-script of course LOL)
    rwinterton's Avatar
    rwinterton Posts: 289, Reputation: 15
    Full Member
    		  
    #2

    Feb 13, 2009, 06:48 AM

    You posted this under "Homework Help". I answered there

    https://www.askmehelpdesk.com/math-s...nd-316810.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Best way to cap a copper water line: compression fitting or copper cap? [ 29 Answers ]

Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...

How to conect copper threaded tee to copper piping [ 14 Answers ]

I tried to install a copper threaded tee which connects 2 ends of copper piping and a line to dishwasher (plastic hose). Still a dripping leak at the joints.

Ammonium Sulfide 3ml (approx) safe outdoors? [ 1 Answers ]

Hello, Would 3mL of an Ammonium Sulfide solution be considered unsafe and/or annoying if it were used outside on private property? I live in a city and want to keep my stoop clear of those wanting to use it as a smoking, foul language and vomit stop (yep, cleaned it up last sat). I have an...

Sweating copper to copper valve connections [ 1 Answers ]

I'm replacing my shower with a Moen system that has a Moentrol three function transfer valve Model 3330. The inlet and outlets are copper to copper. Other than removing the cartridges prior to sweating is their any particular trick to heating those connections on the valve? Thanks very much for...

Copper pipes to cpvc: still ground the old copper? [ 1 Answers ]

Hi there... again... I have two copper stub outs that come into my garage, one the cold water in, which goes to my waterheater, and one hot water out, to the rest of the house, underground (slab construction). I will be re-plumbing my water heater and adding a bathroom from these lines, but I...

View more questions Search