Ask Experts Questions for FREE Help !
Ask
    XSkippyX's Avatar
    XSkippyX Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 29, 2008, 09:31 AM
    18.5 hp briggs*& stratton
    Does anybody know can anybody tell me how much oil this engin should take ?

    Thanks skippy
    1983nab's Avatar
    1983nab Posts: 33, Reputation: 1
    Junior Member
     
    #2

    Aug 29, 2008, 04:49 PM
    Quart 1/2 of oil
    Well 17hp Briggs holds Quart 1/2 oil

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & Stratton 14.5 HP I/C [ 7 Answers ]

This engine is on a lawn tractor and suddenly it starts fine, runs for anywhere from 3 to 5 minutes and then suddenly shuts down with a huge cloud of smoke from the exhaust. I restart it and get the same results. Oil level is fine. I removed the OHV cover and a lot of oil mixed with gasoline came...

Briggs and stratton run [ 5 Answers ]

I have a B&s 14.5 (42598x92a) on a Murray 42" riding lawn mower it was given to me the other day by a friend. It wouldn't run so I worked on it a little bit and got it running then it stopped.I figured the carb needed cleaning because it had set for awhile so I took it apart and cleaned it but I...

Briggs & Stratton 18 hp [ 1 Answers ]

I have a troy built riding mower with an 18 horse briggs... this starter gear often sticks in the fly wheel and will not start unless you turn the fly wheel back by hand... I have replaced the starter and still have the same problem... the engine runs fine at all speeds but the problem still exists...

Briggs and Stratton 10 hp [ 1 Answers ]

Can some one help me I need to know what valve setting to set on my briggs stratton generator. Thank you for you help

Briggs &stratton 15 hp. [ 1 Answers ]

The other day this engine just quit and I had no spark from the coil. It has the electronic ignition so I cleaned everything under the flywheel and put it back thinking that this must be the problem but no. There is a small wire that goes to the coil and when I pull it off it will fire. I found two...


View more questions Search