|
|
|
|
New Member
|
|
Aug 19, 2008, 01:54 PM
|
|
Garbage disposal
I want to put a garbage disposal in my restaurant but I am not sure if it will work with my sink. I have a standard commercial sink with about a 1 1/2" drain.
Can anyone tell me what is involved if anything to complete this project?
|
|
|
Home Repair & Remodeling Expert
|
|
Aug 19, 2008, 01:58 PM
|
|
Residential kitchen sink are also 1 1/2" drains. Remove the entire basket, the garbage disposer has its own replacement basket that allow the unit to connect from underneath.
|
|
|
New Member
|
|
Aug 19, 2008, 02:10 PM
|
|
Garbage disposal2
I am not referring to the drain pipe, but to the hole in the sink itself.
|
|
|
Senior Plumbing Expert
|
|
Aug 19, 2008, 03:09 PM
|
|
Hi Ceke586...
All residential kitchen sinks and all commercial sinks (except hand sinks and lavatories) have a standard size hole in them to accept strainers or garbage disposals.
You will be fine installing a residential disposal or even a larger batch feed commercial disposal.
Let me know if have any more questions...
MARK
|
|
|
New Member
|
|
Aug 19, 2008, 03:54 PM
|
|
Ok, when I buy a stopper for my sinks, it measures 1 5/8"
|
|
|
Ultra Member
|
|
Aug 19, 2008, 07:20 PM
|
|
As mark says all residential kitchen sinks and all commercial sinks (except hand sinks and lavatories) have a standard size hole in them to accept strainers or garbage disposals,please click on the link below and it will lead you step by step how to install a garbage disposal, good luck.
John
Installing a Garbage Disposer Tutorial
|
|
|
Plumbing Expert
|
|
Aug 19, 2008, 08:52 PM
|
|
I think you are not getting correct info from other plumbers: You have to have 3" drain opening for regular garbage disposer installaion
|
|
|
New Member
|
|
Aug 20, 2008, 02:43 AM
|
|
That illustration was great, but still will not help me. Just tell me how to install one on a utility sink. (hand sink) That is the size the drain hole is on my sinks.
|
|
|
Senior Plumbing Expert
|
|
Aug 20, 2008, 03:16 AM
|
|
Ceke...
I think we're getting hung up on some terminology and measurements here...
You said you had a STANDARD COMMERCIAL SINK with an 1 1/2" drain... and we told you that any standard commercial sink will be able to fit any disposal... any standard commercial sinks except HAND SINKS.. (see post #4 and post#6)...
Now at post #8 you are telling us it is a UTILITY SINK and finally a HAND SINK..?
So, if you have a HAND SINK with 1 1/2" hole in sink ...you cannot install a disposal on it as originally posted at post#4.
Hope that resolves this for you... ;)
MARK
|
|
Question Tools |
Search this Question |
|
|
Check out some similar questions!
Garbage disposal
[ 1 Answers ]
The disposal won't was hall the crud down the drain
Garbage Disposal
[ 3 Answers ]
We just moved into a house. It was built in 1951. The sink in the kitchen is a large single sink. Not replaceable without replacing the counters. It is sunk in with grout and original tiles surrounding it.
Is there any way to install a garbage disposal with only having a single sink?
...
Garbage disposal
[ 1 Answers ]
My disposal has always worked just fine, but today it's sending water back up into the sink after it's gone down once the switch is turned off? A clog? Does this necessarily mean a plumbing call?
Garbage disposal
[ 1 Answers ]
I have never had a problem running my garbage disposal before until I replaced it with a bigger and better one. Now my disposal backs up, and when I run the disposal, it backs up into the adjoining sink! Please help!
Hi Mom,
Sounds like you have a clog in the lateral, (horizontal ) pipe in...
View more questions
Search
|