Check out some similar questions!
Grinding noise from Craftsman LT1000 when engaging blades
[ 6 Answers ]
Craftsman LT1000 riding mower, model 917.272761 About 5 years old, nothing but oil changes done on it Started having issues when lawn got high while I was away. When I came back and tried to mow (even at highest setting), the blade would get bound up on the grass and kept stalling the mower. ...
Bolens 15.5 38 in cut. Tractor jerks w/ blades are engaged
[ 2 Answers ]
When I engage the blades, The whole tractor jerks pretty hard in a way, should I say( like a missing tooth on a gear) Seems to do it more while turning or going up hill. When I disengage the blades the jerking stops and the tractor acts fine, as long as the blades aren`t spinning. Pullys...
Craftsman Lawn Tractor, 2 blades don't turn
[ 1 Answers ]
I have a Craftsmand Lawn Tractor 18.5 HP, two of the blades don't turn. When manually turned all three blades turn, could it be the drive belt? Only one blade turns when engaged.
Craftsman Lawn tractor blades won't disengage
[ 1 Answers ]
The blades on my Craftsman Lawn tractor 917.270860 won't disengage. I looked at my buddies craftsman and it appears that the clutch cable is not moving the pulley to disengage the blade belt, I guess it is frozen. How do I remedy this? Pete
Craftsman garden tractor makes noise when transaxle is engaged
[ 4 Answers ]
I have a 2000 Craftsman Garden tractor that makes a pretty rough noise after I engage the transaxle. And it sounds like its coming from below the motor and not towards the rear of the tractor. And the tractor moves fine after I engage the transmission I know that if I don't get it fixed something... View more questions Search
Add your answer here.
|