|
|
|
|
New Member
|
|
Jun 24, 2008, 04:16 PM
|
|
Toilet Flapper
The toilet flapper closer too soon (as soon as you release the lever). It is a new flapper; any suggestions?
|
|
|
Eternal Plumber
|
|
Jun 24, 2008, 04:29 PM
|
|
Originally Posted by lobtuf
The toilet flapper closer too soon (as soon as you release the lever). It is a new flapper; any suggestions?
With the flapper seated the linkage wants to have 1/4" of play. Too much play and the flapper doesn't get pulled back enough giving you a short flush. Too tight and it lets water seep past the flapper. I adjust the chain by the link and if it needs fine tuning, I bend the flush lever rod a bit untill I have the desired play in the linkage. One more thing about a flapper. you will see where the old flapper hooks onto the base of the white overflow tube. On a older type with no hooks the flapper has a ring that slips down over the overflow tube to the seat. If your tank has hooks, take a sharp knife or scissors and cut the neoprene ring off on the marks provided and hook the flapper on the hooks. Leaving the ring on will interfere with the flush. The water level in your tank should be 3/8 to 1/2" below the top of the overflow tube when the tank's filled. And the little tube wants to run from the ballcock and connect to the white overflow tube.. m good mluck, Tom
|
|
|
New Member
|
|
Jun 24, 2008, 08:50 PM
|
|
Or go to home depot and buy a flapper that has an adjustment that allows the flapper to stay open for a longer period.
|
|
|
Ultra Member
|
|
Jun 24, 2008, 08:56 PM
|
|
This is the first time that I hear about flappers with adjustment, who makes them.
|
|
|
Ultra Member
|
|
Jun 24, 2008, 08:59 PM
|
|
lobtuf,
If you follow Tom's instruction you will fine he is the expert we all should listen to him, Thank.
John
|
|
|
New Member
|
|
Jun 25, 2008, 05:31 AM
|
|
I don't know the manufacturer but I know they sell them at home depot. I might have one in the garage. I will check the brand for you...
|
|
|
Ultra Member
|
|
Jun 25, 2008, 05:38 AM
|
|
If it a new flapper you don't need to buy a new one follow TOM's instruction or use on the link that poste #3, Thanks and good luck.
John
|
|
|
Ultra Member
|
|
Jun 25, 2008, 05:52 AM
|
|
Thanks it be good to know.
John
|
|
|
Ultra Member
|
|
Jun 25, 2008, 05:56 AM
|
|
Thanks Tom,
They call this adjustable because you can cut the ring, or there is something else to it, also I would like the link below with you all, thanks.
John,
How a Toilet Works
|
|
|
Eternal Plumber
|
|
Jun 25, 2008, 06:18 AM
|
|
Originally Posted by afaroo
Thanks Tom,
They call this adjustable because you can cut the ring, or there is some thing else to it, also I would like the link below with you all, thanks.
John,
How a Toilet Works
Thanks for the link John. I've copied and saved it. Here's your answer about adjustable flappers.
Adjustable toilet tank valve to regulate flush water volume Document Type and Number:United States Patent 5390375
Abstract:A flapper valve for sealing the discharge outlet in a water tank and for regulating the quantity of water discharged during each flush by reducing the buoyancy of the flapper valve through water inflow into the flapper during flushing. The pivotally mounted flapper has an upper body section including an integral soft annular sealing flange and a downwardly depending body member. A cap is insertable at the lower ends of the side wall and defines a water inflow aperture therein. The cap is of a relatively rigid material and serves to support the buoyancy chamber formed by the upper body portion and the end cap against deformation under operating conditions. The cap may be provided with a valve disk for selective registry with one of multiple apertures to regulate the water inflow into the cone as a function of the dimension of the aperture selected in registry with the opening. Regards, tom
|
|
|
Ultra Member
|
|
Jun 25, 2008, 06:29 AM
|
|
Hello Tom,
Thanks for the detail info it is great and I am really learning things from you on a daily bases.
Best Regards,
John
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Toilet Flapper !
[ 11 Answers ]
Okay... my father decided to fix the toilets one day for a variety of reasons I won't go into right now... BUT ever since THEY HAVEN'T BEEN RIGHT!! Wish he'd leave my HOUSE ALONE!! Anyway, I digress... The FLAPPER on the 2 toilets aren't working properly. When you flush they stay up for just about...
Flapper refuses to go down in toilet
[ 4 Answers ]
I recently installed my flapper in my toilet and it was working over the last couple of days. When I went to use it this morning, I noticed the flapper was not going down. In other words, it was not returning to the seat. It remained up. I loosened the chain and tightend the chain. Can...
Toilet flapper sticks
[ 2 Answers ]
I replaced flapper because toilet ran constantly with a small leak. It worked beautifully for a couple of months, but now the flapper sticks in the up position so it is running again for a different reason. Please help!
:confused:
Toilet Flapper Won't Drop
[ 2 Answers ]
When flushed, my toilet flapper immediately raises to a 45 degree angle, but then it will not drop completely unless the handle outside the tank is pulled up (jiggling does not solve it). It drops partially, but then the chain is tight and it is does not drop further. Once you pull up the handle,...
Flapper on Toilet - fixed it, but still have a ?
[ 2 Answers ]
OK, I'm putting on my plumbing cap today! One of our toilets was constantly making a running water sound. When I opened it up, it appeared to me that the Flapper was very old and that was where the water was leaking into. I replaced the new flapper successfully (it was pretty easy! ) and now the...
View more questions
Search
|