Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower Drain Installation
[ 3 Answers ]
As part of a remodeling effort, we are having a tiled shower built in our guest bathroom. We had a plumber come out to run the water and drain lines. He installed the drain. Last night I noticed that the hole he cut in the plywood sub flooring is quite a bit larger than the drain, so that...
Shower drain installation
[ 2 Answers ]
Hi I'm installing a new shower base that came with a self caulking drain (has a rubber caulking ring that tightens round the 2" waste pipe). When the shower base is in position the drain is ever so slightly off center and I can't get the rubber ring over the waste pipe. The drain is set in...
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to...
Converting cast iron floor drain to shower drain
[ 3 Answers ]
I am adding a bathroom to my basement, which has partial (complete? ) plumbing already roughed into the floor (in 1976). Sewage lift station (vented) is 3 ft from 4" styrofoam plug (toilet), 4 ft from 1 1/2 inch cast male pipe end extending through floor (lav, have already added vertical vent...
Shower drain installation
[ 2 Answers ]
Good morning, I am installing a shower floor pan with an integral drain. Should any lubricant be used to install the seal around the 2" drain pipe? Thank you, Jk View more questions Search
|