Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing black adhesive from floor before installing new vinyl tile
[ 6 Answers ]
I have a bathroom (at the church I belong to) that has a hard type of vinyl tile in it. A toilet has overflowed 2 times in the past and flooded the floor. As a result, a lot of the tile has come loose. I have the replacement VINYL tile, but need to know how to continue. Under the tile is black...
Placing Ceramic tile over vinyl
[ 7 Answers ]
Can you lay ceramic tile over a vinyl floor? If so what's the process?:D
Adhesive? New ceramic tile install - one inch hex shape sheets
[ 5 Answers ]
Hello I am putting in a brand new full bath where there had been just a half bath.. I am done the roughing in and the framing, cementboard, sheetrock, etc. - and I have a question about the tile installation. For the floor, I chose an older style of tile that is the white octagon/hexagon...
Secure 2x4 frame to ceramic tile floor with adhesive (no nails)
[ 3 Answers ]
I want to frame up a small reach-in closet in my bathroom (2x4's, drywall), but I have an obstacle: My ceramic tile floor covers cement board and a sub-floor with radiant heat/water-filled PEX. The 5 foot length of closet will span one wall, with short sides. The back of this closet will be...
Ceiling tile adhesive
[ 2 Answers ]
What type of adhesive should be used when installing 4" tile squares to the ceiling of a small, 32" x 32" shower stall. The substrate is cement board. Thanks for the assist! Jay Lorenco View more questions Search
|