Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to replace 'O' rings and Gaskets in Delta Faucet
[ 1 Answers ]
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
Delta Shower faucet
[ 1 Answers ]
I have adelta shower fct. That recently change the inside washers, put now I don't have any pressure coming out. What is wrong?
Delta shower faucet leaks, how do I install seat and spring
[ 2 Answers ]
My delta shower faucet is leaking, how do I install the seat and spring correctly ?
Delta Shower Faucet twists apart
[ 1 Answers ]
After a bit of foolishness, I found myself with a 9 year old Delta Shower Faucet Valve body in my hands in two pieces. The cartridge housing was in one hand, and the brass cross was in the other. Three copper tubes were severed. Each copper tube approaching the valve had a union on it relatively...
Delta Faucet in Tub
[ 4 Answers ]
Sorry for the multiple questions in the same day, but I am at a loss to explain what is going on with my tub's faucets. Currently the cold water side will not stop dripping. I have replaced the stem, the seat on the hot cold and diverter, but it continues leaking. I realize after doing this a... View more questions Search
|