Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replace garage door with wall?
[ 4 Answers ]
Hi All, I have a small one car garage that is part of the basement. I want to remove the garage door and put in a wall with a door so that I can use this area as a workshop and as the primary entrance into the house during the winter. The other entrances are either up the steep driveway to the...
Overhead Door garage door opener light just blinks?
[ 5 Answers ]
:confused: My 15 y/o Overhead Door (brand) garage door opener was working fine opening & closing until a few days ago. It has very low usage because I mostly park my car outside the garage door. Now when I press the remote control w/ new battery OR the hard wired wall switch, the light on the...
Widening garage door opening in cinder block wall
[ 6 Answers ]
Hey I got a dilemma, that is I have to increase a garage door opening from 7 feet to 12 feet and add a foot in height to the door (from 9 to 10). The wall is all cinder block which goes up to about 20 feet tall and 40 wide (it's an old refrigerator for apple crates ) now I know that the opening...
Garage door opener prevents door from opening all the way -- how to fix?
[ 1 Answers ]
My wife and I moved into a house three months ago and we didn't realize this problem before we bought it. I'm trying to solve a problem with an existing garage door and Genie opener which due to the amount of backroom along the tracks, doesn't allow me to open the garage door the full length...
Garage door opener wall mount button
[ 8 Answers ]
Just installed a stanley garage door opener model 810 and I tried to install the door mount button, but I'm having problems. The wall button is very similar looking like a doorbell in which I connect the 2 wires to the opener (motor). However when I connect, the door automatically opens, but when I... View more questions Search
|