Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
One thermostat for separate Heat and A/C systems
[ 1 Answers ]
Hi. I have a mobile home with a forced air natural gas furnace and a totally separate single package air conditioner unit with its own fan/compressor/condenser. The systems share nothing execpt the duct work and each have their own thermostats. Question - Can I buy a single heat/cool...
Thermostat compatibility with heat pump
[ 1 Answers ]
I have a Goodman heat pump--CPLE24-1-- 2 ton -and need to replace the thermostat-what do I need to know when purchasing a new one?
Heat Will No Longer Respond To Thermostat!
[ 5 Answers ]
Well, we moved into this mobile home about 3 weeks ago. We have our a/c and oil heat connected to one thermostat. It was all working fine up until a few days ago. All of a sudden, the heat would not shut off at all. Eventually it got up to 90 degrees in here and I just opened the door to the...
Changing Heat pump Thermostat.
[ 2 Answers ]
Currently have a Honeywell T841A1712 Multi-Stage Heat pump thermostat. I am changing to a Honeywell RTH7500D. All is good except that the manual states "If the old thermostat had wires on W1, Y1, and W2, some modification is required. Call your loca heating and cooling contractor for...
Furnace won't heat in Auto
[ 2 Answers ]
I have read the different posting and replys, but they don't seem to address my problem. Friend has an older Kenmore Power Miser 70 that has an old electronic ign. (no flame senser). The furnace will heat when the fan switch is set to "on" position, and it will cycle the heat. When the fan is... View more questions Search
|