|
|
|
|
New Member
|
|
Sep 1, 2007, 01:58 PM
|
|
Paint over marble
Can marble be primed and painted like some tiles?
|
|
|
Senior Member
|
|
Sep 1, 2007, 04:38 PM
|
|
Is it that ugly? I've never heard of doing that, I guess it depends on where the tile are, if there on the floor id say no, or any traffic areas, but other than that you may find something to adhear to it. Id stick with oil based
|
|
|
Ultra Member
|
|
Sep 1, 2007, 04:39 PM
|
|
Why would you want to paint over marble?
|
|
|
New Member
|
|
Sep 1, 2007, 05:14 PM
|
|
Originally Posted by glavine
Is it that ugly? ive never heard of doing that, i guess it depends on where the tile are, if there on the floor id say no, or any traffic areas, but other than that you may find something to adhear to it. id stick with oil based
A friend has some green marble around her fireplace and hates the color. I have seen tile painted and thought this may work for this surface as well. Thanks
|
|
|
New Member
|
|
Sep 1, 2007, 05:16 PM
|
|
Originally Posted by danielnoahsmommy
why would you want to paint over marble?
A friend o mine has green marble around her fireplace and hates the color. I have seen tile painted over and thought maybe you could do the same or this surface.
|
|
|
Senior Member
|
|
Sep 2, 2007, 07:45 AM
|
|
If you have room for extra thickness you can try and set new tile or marble on top of what she has.
|
|
|
New Member
|
|
Apr 4, 2011, 11:58 PM
|
|
I have heard of marble being painted over, my Mum is looking into it, and I have found some sites online that suggest priming the marble really well, so there are NO shiny patches left, then cleaning with acetone before primeing with a slow drting oil based primer. Then painting over it with your paint, I am still in process of finding the correct top paint to use. It is a much cheaper option than replacing the old marble top!
I hope this was helpful :o)
|
|
|
New Member
|
|
Apr 5, 2011, 12:02 AM
|
|
Sorry I messed up, first sand the top, not prime! :o) First with a 36 grit sandpaper, then prime with the oil based paint, then your top coat.
OR... sand with a 80 grit sandpaper, clean with acetone, then prime etc.
Both methods reinforce the importance of roughing up the ENTIRE surface, or peeling will eventually occur.
Okay, that's it x
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Bathroom Counter -- Marble vs Granite
[ 7 Answers ]
I recently purchased a 2 bedroom pre-construction condo in Chicago. (mostly as an investment)
For the master bathroom I decided to upgrade the counter to marble. (personally - I like marble but I only plan on living there 2 years)
A few people have told me granite is a much better choice...
Granite vs. Marble
[ 2 Answers ]
I've recently installed new cupboards in the kitchen and would like to install marble tile for the counter-tops. But some lady at color-tile said marble isn't the best choice... and of course I found some really nice marble that would look great?
Groutless marble tile
[ 2 Answers ]
I want to put in marble tile in my kitchen, without any grout lines. Is there any special way I'm supposed to do this? I read that the problem will be that the edges of the tiles won't be perfectly aligned so there will be bumps, gaps and raised spots unless the whole thing is polished after it...
Marble and wood flooring
[ 1 Answers ]
We are moving into a new house without flooring. I would like wood floors in the kitchen. My husband thinks it will look "too woody". I am looking for pictures to show him, done with color variation between the cabinates and flooring, it shouldn't. I also want to know it we could use marble...
Cultured Marble Tub?
[ 2 Answers ]
OK guys, got to good deal on a large cultured marble tub + surround from local manufacter. My first pick was a large cast iron tub but no way for me to easily move it in the house. Cultured marble man is going to install the tub and surround for me. The material looks very strong and durable. ...
View more questions
Search
|