Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Bathtub slow drain (used to drain OK!)
[ 15 Answers ]
First, Hello to everyone and thanks in advance for any help. My bathtub used to drain properly (I think.) but not fast IIRC. I've done some searching around the site and found a few good ideas. So according to some suggestions, I've done the following. Unscrewed and remove the overflow...
Bathtub drain repair replacement
[ 1 Answers ]
I have someone coming over for repair work tomorrow.. had a leak in basement- (main drain) liquid waste was coming through crack in cement from outside). In addition to this problem I've noticed that my upstairs tub/shower drain has not been holding water.. and once leaked out of ceining vent/fan...
Installing Shower Drain Where Old Copper Corroded
[ 1 Answers ]
I have an old shower pan that had a corroded copper drain. (Completely Corroded through so that there was some pieces left in the brass trap connection.) I was wondering if PVC can be connected to the brass or do I need to solder new copper. These are 2 1/2 inch pipes, so I'm trying not to spend...
Bathtub drain
[ 5 Answers ]
I need to know what the part is called that has a lever and opens and closes the drain in the tub. I just moved in to an apartment and discovered that my tub doesn't have this so I can't take a bath only a shower. I want to know the right part to request they put back in the tub so they don't bring...
Bathtub drain
[ 1 Answers ]
Anyone care to share their preference for the lever type bathtub drain vs the lift and turn type. I have always had the lever type stopper but I don't think they have worked real well after they get a little age on them. View more questions Search
|