Search:

How do I resolve this problem myself or what do I need to do?

The electrical fuse on my hunter irrigation system pops after running for about 2 minutes on station 1 but works perfectly on all...

How do I resolve this problem myself?

The electrical fuse on my hunter irrigation system pops after running for about 2 minutes on station 1 but works perfectly on all other stations if I bypass...

I have a Kenmore Elite Dryer (Heavy Duty) Model 110.62062100 which runs but produces no heat. Thinking it is a Thermal Cutoff problem, I went ahead to change that but no luck. I had the continuity of...

Well, after no further leads to go by, I took a leap of faith and went ahead to change the thermal cutoff and that did the magic.

Thanks to all your advice, as they came very handy.

Hi Ballengerb1. Thanks for replying to my question. I measeured the voltage as requested and below are my readings:

Red/Black Combination = 246 Volts
Red/(Green & White) Combination = 122 Volts...

I have a Kenmore Elite Heavy Duty (electric) dryer that has no heat even though running. I had the heating element thermal cutoff replaced last year when I had a similar situation.

Not sure what...

1. Electric
2. Didn't check
3. Will have to work on that.

I saw similar postings on this all within the last 2 week and wonder if the problem is with Kenmore dryers generally.

I have a Kenmore Elite dryer which I noticed about 2 weeks ago didn't dry...

Thanks, I'll do that.

Hello,

Wonder if anyone can guide me with fixing my sprinkler system. I had the sprinkler system in the "OFF" position during the winter season. With spring here, I am receiving an error message...

I had gone ahead to call the gas company to come check out the supply to the house. I was advised to check if other gas related appliances were working properly.

Low and behold, my central...

Michelle,

You might be right about the gas/pilot jet. I normally leave the temperature setting at the recommend setting in the manual which is supposed to equate to 120 degrees. At this setting...

Hello,

Can anyone please explain to me why my water heater shuts off after a few days? I first noticed this about 2 months back that the flame was out after about 7 months.

I immediately turned...

This is to say thank you to Esquire1 and Stratmando for your suggestions. A combination of both has brought the disposer back to life.

My kitchen sink disposer just stopped working. The problem started with an initial humming sound coming from the motor when I switched on the disposer and after a while stopped working altogether.
...

Thank you guys for your patience, suggestions and step by step directions. I finally was able to fix the problem.

Just returned from the hardware store where I bought a replacement cartridge and a special wrench meant for this. While trying to pull out the cartridge, there was a gush of both cold and hot water...

It's a Moen single knob faucet. I have both knob and faucet opened as far as I can go. Behind the face plate of the knob, I ran into a cross like connection of pipes (which I pressume to be the...

Were you able to resolve this problem? I am in exactly the same situation as you and have done exactly same as you without a solution at this time.

Please let me know if you've resolved it and...

The hot water pressure in my bath tub/shower is extremely low and hardly dispense hot water. The cold water pressure is excellent and both cold and hot water pressure in the sinks are fine.

I have...

There is no manufacturer's warranty but I have a 30 days warranty from the supplier which is still valid. Any idea how I can check the pump myself to see if there is a partial blockade?

I recently bought a used Kenmore Elite King Size washer model 110.21062000 but has not been able to successfully use it once.

On first load, it started making large noise (like metal to metal...