Search:
Type: Posts; User: jchoo
Search:
Search took 0.02 seconds.
-
Can a 240V item trip the main breaker and not trip it's own breaker? I've got a 240V industrial fan connected to a separate breaker in my 100A panel.
-
I want to switch the fan and the pipe, but if it's not a big deal to leave the 3" pipe, then I'll just get a 4x3 reducer and install at fan. With the 3" should I worry about not pushing enough air...
-
I've got an existing 3" dia bathroom fan vent going through the roof. I want to switch it to 4", is it advisable to have a reducer (4x3) to connect to the exhaust at the roof end?
-
What do you mean by outlets being fed from another circuit?
-
I'm doing construction on my house and I thought I had the breaker off to two of the outlets but they weren't according to my contractor. The panel indicated that one breaker was for the exterior...
-
Regular wall outlets on 15A breakers
-
Why does some of my outlets have 2 breakers tied into them?
-
I'm adding a sunroom right beside my kitchen which doesn't have a return air. The sunroom is open to the kitchen
-
Does each room that has forced air must have a return air?
-
So you are saying that my 2 pole breaker is actually supplying 15A to each pole, correct?
-
If it's a 15A breaker then why do the poles each provide power to different items?
-
I've got a breaker that has two switches and each switch has a marking of 15A. Does that mean it's a 30A breaker or it's a 15A breaker?
-
I want to add a light, switch & receptacle at a end of line receptacle. How do I got about it?
-
Others are saying that there isn't much for expansion for net and there's not enough assets. Also I 've heard from people that it's a different ratio for service type business. Is that true?
-
I switched him to Innova and again he wouldn't eat. I'll put out the Hills and he downs it within a min. I guess I'll keep feeding him the Hills. I think he likes the Hills because it has a stronger...
-
I'm about to list my massage therapy clinic for sale and I'm looking for ideas on how much I should start at? The annual net is $45k. Clinic has 3 rooms and no other expansion is possible. It...
-
He had no negative effect. I went with Hills Scientific diet, but I just noticed it has corn as the first ingredience.
-
I'm changing my 7 month old Bichon to a more high quality dry food. Since Thursday I've been mixing a bit of the new food in, but he picks the new food out and leaves the old behind never coming back...
-
I wouldn't put that past them. Whiner's will be whiner's. Thanks to all the thoughts rec'd.
-
That's what my lawyer said and she said good luck to them.
-
No, they did not have a home inpection done. I also told them they were working fine before they took possession, plus it's been 15 days since they moved in.
-
Doors were working fine before they took possession. How many days do you think I'm responsible for the house after the sale?
-
Can a buyer take legal action against a seller after 15 days of possession? They are saying the interior doors do not close properly and nothing was written in the contract regarding working doors....
-
Thanks to all. I used a closet extension kit and it is a success.
-
Thanks joypulv. Can 2 wax rings work to?
-
I'm about to install a toilet in my basement and the closet flange is uneven. The floor is concrete. One side of the flange is above grade and the otherside sits approx 1/4" below. How can I solve...
-
I'm about to install a toilet in my basement and the closet flange is uneven. The floor is concrete. One side of the flange is above grade and the otherside sits approx 1/4" below. How can I solve...
-
Yeah I chipped away the concrete around the drain pipe for the drain assembly. Wasn't to bad, it only took approx 1/2 hr. Thanks for the input
-
How does one install a neo angle shower base in a basement? I'm having difficulty understanding how the drain is put together. I've got a 2" pipe coming up from the floor. The instructions state that...
-
-
Sorry, I'm lost. Anyway I can incl a sketch here to show you what I've got
-
Oh, okay. I'll check it out. On my original question, what do you suggest?
-
No, but here's a question for you. If I go with a fan/light combination, can only the light go on?
-
I've got power coming into the light box, then pwr to the light switch, then to outlet. Therefore I've got two wires in each.
-
I want to add a exhaust fan with a switch to control it in my basement washroom. Currently I've got a light, switch & outlet on this breaker all working properly. Nothing else tied in. How do I tie...
-
creahands,
What if I wanted to add another outlet (not GFI) ?
Thanks
-
I'm in the midst of adding a bathroom in my basement and I want to add a light, switch & outlet. How do I wire all three? I want to take them off the main box as I have a extra breaker that is not...
-
I'm just going to close up the window as it's not a egrees window anyway. Does anybody else have ideas for me ? How about chaulking the heck out of it ?
-
I have a window in a basement where water is intruding in between the top of the foundation and the bottom of the window. There is a window well outside and it's filled with water. I even have one of...
-
Can new vinyl flooring be installed over old vinyl flooring ?
-
It's above my store front. About 8' above ground
-
Is there a quick way to know which ballast is bad ?
-
My Fluorescent sign just went. I've 2 signs tied in together some how with a total of 4 ballast. One of the signs has been out for awhile and I've been running only one of them. The 1st thing I did...
-
-
Actually one of the black wires coming off the dimmer is going in on the right side of the switch. The other black wire is going to a common black
-
I want to convert a dimmer switch to a single pole switch. How do I go about it ? I've got 3 lines coming in the box. See pics
-
Thanks to all.
I don't need the 240v anymore for the laminate machine. It has been removed.
-
Thanks to all.
I don't need the 240v anymore for the laminate machine. It has been removed.
-
I'll change to a 15A breaker.
-
I've got a 2 pole 15A breaker in my existing panel with wiring to a laminate machine only. I've added additional 2 outlets, light & light switch with 14/2 wiring to the same breaker and my light and...
|