Search:
Type: Posts; User: glassdoc
Search:
Search took 0.00 seconds.
-
As massplumber2008 says, you can't cut tempered glass. It is fabricated (cut and drilled) before it goes through the tempering furnace. Tempered glass can be sanded a very small amount but no way...
-
Debit to tolls, credit your checking acct. Example:
You paid $10 tolls, $20 business lunch, $30 office supplies.
Company writes check to you for $60
$60 credit to checking acct
Debit $10...
-
You definitely have tempered glass, which is EXACTLY the same thing found in automobile door glass, just a different shape and possibly two instead of one.
-
If your floors are water safe (not wood or carpet), put a washrag over the drain and fill to near the bottom of the curb of the shower. This will get you 3-4 inches of water.
-
You have insulated glass that can be replaced without replacing the frame. Look in the yellow pages under Glass, Plate and Window and call them about replacing insulated glass. You should be able...
-
If you are only in your 5th year and have a 10 year warranty, wait until the moisture shows itself again to be sure you have seal failure or try the ice cube (it's safe - read the warnings on the...
-
This is a replacement window. It is designed to be screwed in through the jamb of the window from the inside. You MAY find pre-drilled holes in the jamb on the inside approx. 3 - 6 inches from the...
-
-
New construction windows have standard sizes. Replacement windows are typically ordered to custom sizes. New construction are cheaper for this reason. Measure the window on the outside of the...
-
Could be several different scenarios but hope this will cover it. PUT ON YOUR GLOVES AND SAFETY GLASSES. To remove just the glass, use a putty knife to remove the vinyl locking bead from the edge...
-
Price should definitely not be the only factor. If you want to avoid condensation on the inside of your house get High Performance Glass. Depending on how cold it gets you may not be able to...
-
Andersen doors sometimes have a cap that covers the adjustment screw for the rollers (on the side of the bottom stile of the door). It looks like a flat head screw but just turn it counter clockwise...
-
I'm not sure but I think 16.
-
Grade floor openings shall have a minimum net clear opening of 5 square feet with a minimum width 20", minimum height 24", maximum sill heigt of 44" above the floor.
-
It depends what you mean when you say on the interior. Do you mean inside the two panes of glass or inside the house? Inside the glass is a failed seal and the insulated glass unit will have to be...
-
When replacing a vinyl window, the first question is do you plan to save the window? If so, you will have to get to the nailing fin. If you have trim that is 3 or more inches wide you can remove...
-
Use a NEW razorblade. Any nicks in the blade will scratch the mirror. Use glass cleaner as a lubricant. Spray the glass cleaner on and scrape with the razor blade.
|