Search:

Seriously sounds like you could have an air distribution problem... may also be a maintenance issue.

Yep... when opts that cold, and that frozen it is doing you NO GOOD. Take a break, turn the emerge heat on and go to FLA for the weekend.

The condenser fan motor and blades should be rotating, yes, unless the unit is in defrost mode. A heat pump has to go in and out of defrost depending on outside temp, coil temp etc, etc, etc. It is...

First, you need to be real careful. An explosion can occur if not done properly. The aluminum tis coming off the top of the gas valve is leading to the pilot. It will be down around the front of the...

True, transformers hum as well as do fan motors...

Check and see if your furnace has a flame sensor. It may be corroded or failed.

You need to change repair guys. Your low voltage wiring needs to be checked for proper install. The stat needs tp be checked to be sure it's worried properly. The heat pump needs to be checked to...

You need to be careful of these big box stores and their stats. Anyway, yes---- read the manual. Is there a COMMON required on this new stat? If so, you don't have enough wires. They'll take 3. Oh...

Check 3 things. One is the cad cell located under the transformer, second check the transformer, also check to make sure there's no black goo coming out the transformer as that's not good, then...

The fan should run for a period of tome after the thermostat has been satisfied, usually around 90 seconds which feels like hours. If the fan still stays on, check your thermostat... is it in the ON...

WOE cowboy... Not so fast
Why not try to fix it first. You may have a refrigerant leak, or since it's that cold, your auxiliary heaters might not be at full capcity. Those are arranged in banks of...

The motor or emf hum you are experiencing could be attributed to one of several items. First... if the blower motor has not been serviced since install, it's probably dirty and overheating. Second,...

Always get a quote upfront. Trans has some "bastard motors" that are oem specific and yes, it's expensive. Personally, the 485 for the fan motor and probably capacitor isn't that far off...