Search:
Type: Posts; User: rudolph73
Search:
Search took 0.00 seconds.
-
Sorry not to answer sooner, Doug. I didn't realize there was a page 2 to these messages until today, 7-14. I will try the suggestions you made about the cable shortly. Am going on vacation so won't...
-
Maybe I didn't make myself as clear as I should have. It was easy to disengage the icemaker module by loosening 2 mounting screws and lifting it off. But there was a thick white cable that goes from...
-
Good luck with YOUR GE. I just replaced my defrost heater in mine for the second time about 5-6 hours ago. The fridge seems to be working again. I started removing the icemaker unit to follow up on...
-
OK. Will do soon. I was about to try to fix the icemaker problem but my defrost heater went (I told you this GE dog has given us much trouble) so I have to go out and find a part tomorrow and get it...
-
Thanks, Esquire1, for the helpful reply. You say “many times you can just raise and lower that arm.” I take that to mean that it is the movement of the arm up and down that is supposed to shut off...
-
We have a GE GSS22SGMC BS side by side ser #SA232724 refrigerator which has given us nothing but trouble ever since we’ve had it. The latest problem for which I am looking for answers concerns the...
-
Thanks savage and dmatos. After procrastinaing too long and mulling over your advice I decided to give it a try myself - with excellent results. I just took a heavy hammer and hit the bricks from the...
-
Thanks, dmatos. I should have mentioned that we have to remove the entire chimney below the roof and inside down to the basement level.
-
Advice needed: There are 2 unused brick chimneys we have to remove in an old two–story house my son and I are rehabbing. We have quite a bit of experience at rehabbing but have never taken down...
-
Thank you all for your encouraging advice. Even thouigh I could not get the last kno:) b off, I was able to bend the plastic panel enough to get behind it and successfully link up the choke shaft....
-
Thanks, Eqaaah, for the good information. I have already removed the red cover and unbolted the control panel. I have also managed to get 2 of the knobs off. The only one I haven’t been able to get...
-
Thank you newaukumdon for your information. I appreciate it. However, I am not familiar with PART SMART or how to discover whether a Honda dealer has it. Also, as far as I know a schematic is an...
-
My aged Honda HS35 Snow Blower runs like a dream and usually started at the first pull. However, the sort of u-shaped wire at the bottom of the Choke Knob shaft somehow came loose from wherever it is...
|