Search:

I am finishing my basement bath. As to the venting of the plumbing. From left to right, sink drain, toilet, tub. All drain to a lift pump. A vent is installed there. At the tub drain connection there...

The 2" drain pipe in the dap out does not come up the center so I can't get the tub drain into the dap out. Can I ell to it or 45

Do I cut away all of the cover all away around? Sounds like the thing to do

In my roughed in basement bath, there is a 12"x12" black plastic cover in the floor. Does that cover the shower/bath drain pipe? If so to gain access I guess I just cut the plastic away

I am looking for some ideas on where to start framing walls in my basement.I have started one wall along a floor beam. Then laying out the wall along the exterior wall I found that something isn't...

I am installing a beacon morris bru 45 heater. Looking for some advise on running the flue. Through the wall or the roof. And how to finish off if I go through the wall. Its vinyl siding

Yes.. I was unclear to me also. Thanks so much for your help. If you come up with any other ideas let me know.

Bob

So my hot (black) incoming goes to L1 and my netural ( white incoming goes to L2

I am sorry.. the unit I have is a beacon morris bru 45. Looking at the wiring diagram it looks like L1 is the hot leg and L2 is the neutral. Just want to be sure.

I also have a question on installing this unit. On connecting the electrical. The L1 is the hot wire and the L2 is the neutral?