Search:
Type: Posts; User: bradpeterson
Search:
Search took 0.01 seconds.
-
Sorry to keep bothering you all, but this forum keeps coming back as the most helpful place I find :)
I want to force the company to give me all my money back. But I think I might need some good...
-
They did some calculations, two people said it would be OK.
I wouldn't mind a double check. The main furnace kicks into its second stage about 5 minutes in, and is rated to burn at 92,000 BTU...
-
Just an update (in case people run into this thread months down the road and wanted to see the result). We've had the furnace folks over a few times. Here's what we've found:
* All tests showed...
-
Thanks for the comments.
When I talked about temperature range of the vents, I was summarizing the temperatures I was seeing coming out of the 6 vents in the basement.
When temperatures...
-
Ok, I just ran a bunch of tests. Because I'll need to explain what I found to the furnace people as well, I put it all in chart form. (Plus, my job has me analyzing stuff all the time, so this is a...
-
I know that right before we put the furnace in, I saw a pit with three 4 inch metal pipes heading out towards the rooms.
At the supply ends, it almost looks like the ducts are a trough, a foot...
-
6 supplies (there are 4 rooms, the two larger rooms get two supplies). There is one return, it's on a wall adjacent to the furnace. (It's a very large return, and it's positioned about 10 feet from...
-
You know, this may be the issue.
The device is counterflow, so the ducts run under the slab. I know some vents seem to blow out slightly warm air, but a few don't seem to be of normal warmth. ...
-
Thanks all. I'll be doing some meter tests later today, grabbing lots of data along the way. Luckily I have an upstairs floor furnace of very similar characteristics (and the floor layout is almost...
-
Yep, two strand wire. Only W1 is connected.
-
Thanks for the reply. Sorry for not having the full details, I'm just a lowly homeowner learning about this stuff for the first time. :)
It's an Armstrong G2D95CC060V14B. Info on it here:...
-
This September, we had a furnace installed to heat the basement. It's an Armstrong, two-speed, 95% efficiency unit. The specs say it can do 57,000 BTU/hr, and my basement is 1350 sq ft.
...
|