Search:
Type: Posts; User: terreneuve
Search:
Search took 0.00 seconds.
-
Thanks
That's what I meant:D
John
-
Thanks for the help.
I'll replace the 1st sequencer and see if that solves the problem.
John
-
There are 3 sequencers in the unit but it seems that one is wired to the fan - would I be correct to assume this would be the suspect sequencer?
Is it common for a sequencer to fail as the unit...
-
Hi
I have a 20KW Lincoln ( similar to Broan) Electric Hot Air furnace.
It is less than a year old and was working fine until today when the fan would not
Come on when the thermostat would...
-
Canada is right! 10/2 is right -I made a typo. That's correct about the red covered 12/2.
It's funny some words here are spelled differently and vary between provinces(not just Quebec) and also...
-
Thanks! One last question though - I have 10/3 NM for wiring the heaters and wonder why is it coloured orange - is it a standard colour for heater cable?? I have seen in different size cables you can...
-
Happy New Year everyone!
I want to install 2 x 5000W fan heaters in my garage.
I need to install a sub panel about 15ft from the electrical room.
The subpanel will only have 2 x30A breakers...
-
There is no address just "Made in Canada" The model number is FEM20-M2401AM-A.
Power is 20KW
Thanks
John
-
For thermostat control would you think the low voltage side terminal block would be wired to the thermostat as other electric furnaces as no control side wiring diagram with the furnace.
Are...
-
Hi
I am looking for an installation manual for a 20KW Lincoln Electric furnace.
Tried Google but nothing comes up?
Thanks
John
-
Thanks TK
I was thinking 2 lines would be the best also. Our code is very similar to the US code.
I appreciate your in depth answers!!
John
-
Thanks everyone for your input!
I think the radiant ceiling heat is definitely a better alternative to baseboard but fan forced is certainly an option too! I am going to try and do a cost...
-
Rock and a hard place is right on the money!!
A/C is not important but oil ( I am in Eastern Canada) has been between $3.50 and $4.50 per gallon and the future for oil does not look bright!!!
...
-
Thanks for your input - I have made some notes below
I don't really want baseboard but don't want to upgrade the main service if I don't have to either!!
-
I am new to this forum and from what I have seen you have a great community - a credit to all!
I have a few questions regarding baseboard heat in a retail space (open floorplan 2400 sq ft)
We...
|