Search:
Type: Posts; User: marked
Search:
Search took 0.00 seconds.
-
If your laptop has a wireless capability, you just need to manually view for the wireless network of your router then after that just connect to your wireless router SSID or wireless network name...
-
First thing to do is to check if your wireless adapter is still properly installed under device manager.
Do this :
Go to device manager and check if you will see there your wireless adapter , it...
-
Try to access the router setup page and change the ssid and channel to and that should fix this problem...
-
A router will only gets internet connection from active internet from a modem like a cable or a dsl connection, the router will just share it to the computer connected to it...
-
Since the only problem here is not getting any valid IP etc on the wireless computer using SP3 , just put a static IP and dns to that computer and everything should be working...
-
Media state media disconnected is just informing you that the computer is not connected wired or wireless to any network, try to go to safe mode if you want then do a system restore on the time that...
-
Can you please explian your situation further so we can help you better...
-
No problem, don't forget to rate/accept the solution...
-
This can be cause by a malware , you try to run a anti malware software like malwarbytes that worked for me...
-
YOu can also check if your log in has a hard drive size quota , that can be the problem...
-
You may need to reinstall windows vista on this computer because this can be a corrupted operating system...
-
This can be cause by a malware just like when task manager is not working, You can try running a anti malware software like malwarebytes...
-
YOu can also try to boot from safe mode and do a system restore from there
-
No problem... Post back if you still need further help... :)
-
Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has Google in it. Just replace all...
-
YOu can just get a router and connect this two printers on the router since they have built in ethernet port , then after that install the drivers on all computer and setup the printers as a network...
-
Can you tell me what is the brand and model of your router>>so I can help you better:)
-
YOu can try first accessing the router setup page and change the wireless channel to 11, and if still the same prblem check if there's any high gain antenna that you can use for that router if none,...
-
No problem, if that is the case just access your router setup page and do some changes on its wireless settings like, changing the ssid, channel and disable also the wireless security and try to...
-
YOu just need to have a broadband conenction for you to use that Skype service, it will be gard using a dial up..
-
This is cause by a malware, try to run a anti malware software like malwarebytes and that should fix that...
-
TRy restarting your computer then reconnect to the network , you can also do a power cycle on your router by turning it off for 20 seconds...
-
YOu can just try to copy the whole folder for that program from the program files then transfer it to the other computer and put it also on the program files folder and look for the shortcut icon...
-
You have a cable internet and I believe you have a device there like a wireless modem or a wireless router that transmit wireless signal that's why people with wireless laptop can access the internet...
-
If you're using IE7 it has some security feature on it that may have cause why you have those information there...
-
Keepitsimple:
You have a point there, that's why I told you if anyone can make work with that setup just inform me...
-
Do IPCONFIG on the command prompt and look for Default gateway number that is the router IP address..
-
What I'm saying here is base from my experience not base on the data sheet.. try to test it by yourself and inform me it work for you Keepitsimplestupid...
-
Keepitsimplestupid;
I'm working for Linksys that's why I can say that, if you want to try go ahead...
-
Yes, that one has a load balancing capability but it cannot combine the speed of the connection... you can just redirect on which connection will the traffic go to ease some network traffic..
-
That's is a virus or malware of some kind try to run a full scan on your computer with a good anti malware software and that should be fix..
-
If you have a wireless network setup that should be easy, but if not you just need to create a AD-HOC network on those 2 wireless laptop...
-
Connect a computer wired to this router, then follow this steps;
Click on start>RUN>type CMD hit enter then after that type IPCONFIG on the black window and look for the deaful gateway that should...
-
YOu need to enable file sharing on both computer...
-
Sorry to say but you need to get a router in order for you to share the internet connection, because this hub don't have the routing capability...
-
Try to restart the computer and also your modem for about 1 minute then , right click the local area connection and click repair...
-
You just need to access the router setup page and there you can find all the settings of your router including the wireless security...
-
Better check if first if your modem is set tp bridge mode , because if the modem is set to bridge you need a dialer so your computer will be able to access the internet...
-
The wireless settings of your router doesn't match with the settings on you computer most important is the wireless security key.. You can check that out on your wireless router...
-
This setup wonr be possible , you cannot combine the speed of that connections...
-
You need to use Itunes to transfer those songs to your Ipod , go to this link for the Itunes download Apple - iPod + iTunes
Hope that helps...
|