Search:
Type: Posts; User: Wolfwerx
Search:
Search took 0.00 seconds.
-
That does confuse me. The only thing I can figure is that "plug" of muck moved enough to allow seemingly free flow when back-flushed with the hot water but, why still none came out & why it seems to...
-
'Never found a model number... However, see below:
Cold water flowing at last! We finally got... tired of blind man's bluff, cut & removed the line between the cold shut-off in the wall to the...
-
Cold water flowing at last! We finally got... tired of blind man's bluff, cut & removed the line between the cold shut-off in the wall to the mixer. All was clear until the street 90º into the mixer,...
-
Thanks but, been there, done that. The lack of cold water through the "t" shaped mixer/hub where the cold supply, hot supply, tub spout, shower, cartridge & control knob meet has been a problem since...
-
Help! There's no cold water to my tub/shower. The mixer/hub has a single knob Moen cartridge (which matches a "Moen - Magnum Replacement Cartridge" #1225 from "Home Depot") sticking out of it but, I...
-
No answer... Did I do something wrong here or do I need to start a new thread?
-
I did have to use a Moen cartrige puller & it was fairly cheep, worked great, & now I have a new tool in my bucket but, the problem persists: I flushed hot water through the empty stub at the mixer &...
-
Click the "Go Advanced" button under the message window. Then, to attach an image, click the "paperclip" button up top of the message window [see image below]. Then follow directions.
Good luck!...
-
_________________________________________________________
Okay. Sorry for the delay. Life intervened. I've removed the knob, washer, silver collar, & retaining clip. The cartridge should slide...
-
(The new bladder & pump switch are still working. Thanks again!)
Since our adventures with the ruptured bladder in the pressure tank we've had little to no cold water in the shower, which...
-
Gentlemen!
"Thanks for your support." It worked! The project went much much better than I expected. The biggest hassle was getting the old bladder out. I ended up pulling at the old bladder with...
-
________________
If I'm understanding you correctly, you mean using it like the old style pressure tanks with no bladder nor diaphragm. That's pretty much where we're at for the time being & the...
-
_____________
Yes I did know but, I think I missed something last time. I like the way you put it so, I'm posting that as a check list next to the tank. Thanks.
~ W ~
-
Thanks for your reply. It supports what I've suspected & learned so far. The six month check as opposed to yearly is interesting. As is the chlorine problem. Fortunately, chlorine is not a problem...
-
Does anyone have any tips or additional instructions? We're replacing the bladder in our Flotec FP7110T-04 42 gal. water pressure tank. We have the new bladder, expensive !@#$%^&*! That it is. No...
|