Search:
Type: Posts; User: abner
Search:
Search took 0.02 seconds.
-
To remove the dip rod you will need a rachet to remove the square looking scew on top of heater, dip rod should pull straight up once screw is remove.
-
Turn bottom of spout to the right and spout should come off, if spout is to old you might need a pair of pliers but be careful the spout can scrach.
-
I highly recommend leaving it to a professional, but if you want to try it all you need to connect pvc to cast iron is a 4" no hub addapter and a 4" no hub band. That's the only way to connect pvc to...
-
You would have to cut it out with a saw saw and fine tooth blade,put it in the drain hole and cut the side but be careful not cut the bath tub.I would highly recommend a lift and turn drain over a...
-
It sounds like you are having a vent problem, when you use other fixtures in your home your water closet (toilet) empties out because the vents are looking for air.
-
Laundry drain lines must be 2" in diameter not 1 1/2, (which should be what exsisting),in order to drian properly. You would have to change the drain lines and also the water supplys need to have...
-
Yes, you will have to replace the inter body cartridge. First try to tighten the handle if that does not work then replace the cartridge, you can find a cartridge at you're local plumbing supply...
-
Is there any program available for ex convicts to get a scholarship,grants?
|