Search:
Type: Posts; User: MP-Squared
Search:
Search took 0.00 seconds.
-
To massplumber2008:
Mark, sorry for the delay but it has been hectic. I called Kohler and explained the situation to the rep. She really didn't have an answer but said the manufacturer of the...
-
-
Thanks Mark. Looked closely and checked with dry tissue. No water into bowl. "Hissing" sound could explain it but I would expect pressurized tank to fill after a day or two. Toilet is not used much. ...
-
Our 18 year old Kohler 81100 pressure-clean Flushometer toilet sounds like water is constantly running very slowly, but it's not going into the bowl. It stops only when I shut off the water supply...
-
Thanks for the response Tom,
The model on the Kohler tank is K3404PB, apparently made on 8-6-91. The model on the pressure tank is 811000. This is a one piece pressure clean Flushometer...
-
My Kohler model 811000 (Pressure Clean) Flushometer toilet sounds like water is trickling somewhere but I can't see it. It does not appear to be going into the bowl and there's nothing in the china...
-
Quote from 21boat:
The problem here is I see Old wall paper steamed/scraped off drywall and usually that's a hard thing to do on drywall, especially if "sizing: wasn't used when the paper was put...
-
Yes, the peeling paint is 2" by 4" or larger. But when I start scraping it off, the paint easily comes off in large areas, some 1 ft by 2 ft. ALL paint layers are coming off together, right down to...
-
No, the paper surface on the drywall is still there and in very good condition.
-
Wallpaper was removed from our living room by a "professional" and the walls painted. The paint peeled in large pieces in several areas within a couple years. We had another painter scrape and...
-
I have a one piece Kohler pressure-assist toilet, model K3404 PB #20080, made on 8-6-91. The Kohler Pressure-Clean Flushometer Tank is a Model 81100.
Water is dripping from one of the bolts on the...
-
Thanks biggsie. I removed the defective switch a few years ago and bypassed it as an emergency fix. Haven't used the saw much lately and don't remember what the heck I did with the switch (dumb)! In...
-
I need a power switch for an old 12 amp circular saw. It's an Electro Engineering 7.5 inch Model 1222. I think the company is out of business. They were in Chicago at one time. The saw is at least 25...
-
OK, Thanks a lot. The one piece Kohler pressure-assist toilet is a model K3404 PB #20080, made on 8-6-91. The Kohler Pressure-Clean Flushometer Tank is a Model 81100.
Water is dripping from one...
-
This is a ONE PIECE Kohler toilet with a pressure assist tank. I don't think there's a gasket on the bottom of this tank, as in your diagram. I assume the bolts on the bottom of my tank are attached...
-
Thanks for your confidence in me. Can anyone give me an idea of what I might be up against when I start pulling the pressure tank apart? Doesn't look like it's easy to get at it.
-
I have a one piece Kohler pressure-assist toilet that is about 14 years old. Recently it started to leak from the bottom of the porcelain tank. It appears to be dripping from a metal bolt in that...
|