Search:

Can anyone help me with internet explorer? Every time I try closing windows it gets stuck and freezes. I thought I tried everything.

Internet explorer program is still having problems, ever since I removed 2010 avast atti virus free edition,. and installing AVG free edition.. closing windows freezes and internet explorer )vista...

Can anyone help me with internet explorer msft vista ultimate ? Every time I want to close the window, internet explorer pops me a prompt.. program still running do you want to wait for program to...

Can anyone suggest which free atti virus program is good enough for home computer? I was using free avast addition think it was 4.8 but this year I don't believe they offer free additions.. I heard...

Kitch, thanks again and you take care.

Toyota did an excellent recall job , they fixed everything and more! Brakes are all done and so is the suspension & Alignment. Now I can feel better going to renew my inspection and more importantly...

Captrich, toyota finished the recall and I noticed they replaced north front arm suspension assemblies. As well as everything they stated in the recall notification.They did say I needed a new ypipe...

The stabilizing bars (or tierods linkages I was referring to) were rotted off.. meaning the rods on north sides were not linked and I was told these parts were not covered.. I wasn't going to wait...

Rich, upon inspection with the toyota service manager, I was told the recall part will take several weeks ordering from toyota to the dealers garage where I purchased the 2001 tundra brand new. My...

Rich, The garage manager stated that certain components will not be covered under the recall.. like I said, after they did the evaluation, the garage manager at toyota pointed out to me the rotted...

Denso it is, I will first use that can of BG44K I just bought on eBay, after running it as recommended.. the whole tank in a day.. I will probably take a ice fishing trip way upstate ny for a round...

I will definitely get that BG44K asp.. also will take heed when replacing bank 1 sensor 1 os on driver side which is before catylic converter, not to use any lube to contaminate sensitive sensor.. ...

Cool! I know I seen the bolts and a lot of corrosion , I already replaced the tie-rods with oem parts I purchased online because toyota said they are not included in the recall. I verified this with...

You guys are terrific.. the check light finally came back on, yes.. my tundra has 127k.. the first os sensor was done by the dealer at 53k (bank 1 sensor 1) than bank 2 sensor 1 went at 83k and now...

Okay, been doing a lot of stervice stuff these days so I bought a diagnostic scan tool for 23 dollars and found out the code was an oxygen sensor.. But before jumping the gun and buying a 100 dollar...

2001 tundra recall

--------------------------------------------------------------------------------

Anybody know what is suppose to be covered under the recall notification? My toyota dealer...

Well so much for doityourself vehicle maintenance. I wonder if toyota and other foreign imports are deliberately engineering faulty fuel sensor components or is it the united states EPA or other...

I know my cigarette lighter socket hasn't been working around the time the engine ck.light came on! So what you are saying is that the jiffylube guy who changed my oil and used a digital tester...

Toyota tundra third time the engine check light came on within three years! My question is why was the first time the oxygen sensor failed, toyota replaced it free under a recall notification?. and...

Good man Mark! I read you and the others and appreciate your thoughts on this matter.

okay gentlemen, I done a few intricate remodeling bathrooms in the past but was just curious so I want to ask. I am not a licensed plumber or eletrician, I am a licensed general contractor. One more...

Can anyone here direct me site links where I can get a n approxiate cost for bathroom renovation work? I understand each job is different but looking for a rough estimates for complete labor without...

Strat, the GFI receptical and three light switches are connected to a 4gang box. I completed all the wiring but to this box, I had a licensed eletrician wire the four and see now how simple it was.....

Start the fourth is going to be from another line feed circuit.. I just want to use the GIF receptacle that I mentioned to feed two light switches.. the 4 gang will have one main feed from the...

Yes start, the GFI receptacle I am using from the breaker feed had a label for additional switches and so I figured that out.. although I have a metal box, I used a 12" or so of 14 gauge to loop...

Hello, I have a home project for my basmt bathroom.. I bought an expensive metal box with mudplate and gfi outlet which will be fed from the main panel (always live) from there I want to piggy back...

Yes, I use to work as a field service tech for a cable co.. . I have plenty of fittings and passives with rg6 I could run up the sub pole. I have the 70-300 ohm too.. I suppose I can try getting...

Think I want to try a cheap dipole first outdoors on the subpole using rg6 and a few passives. I checked with a site that gives all the local stations which are few, probably all I'll get anyway with...

Was hoping someone could recommend a better FM antenna setup in upstate newyork catskill region.. I recently thought I upgraded by purchasing a new (made in china) iPod docking fm am radio boom box.....

I finally finished my stairs!! Everything is code and turned out next to perfect.. riser install I will wait for this wet wood shrinkage

I'm going to do this right and eventually put in risers.. might go 1x4s.. and will use a good rail system displayed like this one in section 16....

Ballenger is right, I bought a small precut stringer from home depot and used it for a template on my 16 ft 2x12.. not sure how I miscalculated but, the deck was too high for my precut to span. I...

well it turned out like this today.. I used a precut stringer as a template on a 16 ft 2x12... it turns out that I need 20ft stringers instead to reach the deck. I thought I used the calculator right...

Yes, I thought about it and prefer to have a solid staircase and it will be no less safe without the boarded risers.. IMO I think it is actually safer without boarded risers knowing that deep snow...

I'm cutting 2x12s open stringers three 6.5 rise and 10" run with two 5/4 x 6 no.1 premium decking to give me a 1" bullnose.. using 2" self tap deck screws (star head bit)

I am deciding with 2 5/4 x6 decking and three 2x12 stringers with a 1 in. overhang. The treads will be 36 wide with the stringers set in one inch on both sides.. should be solid enough with about 16...

graspable handrail I can see as code.. but mandated risers I will have to check on that.. I could argue that risers would make it difficult for brooming off winter snow. Although risers as you say...

okay, I'm starting this staircase project soon.. got the sq.clamps and know my rise is 129" top of deck to slab which is level out to where the bottom step land. Including the top deck I have 17...

Yes, this is why I wanted an opinion for the treads, I know how to crown my hand picked lumber. I agree 1x6 decking is better in appearance. I will consider harolds option using a third stringer. Ty...

ohh!. few more staircase planning questions.. I want to use pressure treated 2x12x16s or 18s whichever the mill carries.. as for the treads.. I was wondering if 2x12s is preferred for sturdier step...

You guys are GREAT! I haven't started this project yet but see exactly what is needed to do this a lot easier and with more confidence. The original question was basically correcting the existing...

I want to layout a new set of stringers to replace an old existing one, I want this stringer 7.5 instead of 8" on the rise if possible and..definitely want a 11.5 tread as opposed to the 9.5" tread...

Crea, that I did but it was also backand forth two flights of stairs for intricate cuts on my wetsaw I had set up in the garage.. and my walls were all centered so my patterns and layouts were true...

What is an average labor rate per sq ft. using italian porcilian tile for a 4x4 square shower over kerdi system the ceiling and curb is 6x6 tile the alcove from bottom half way up is 12x12...

Had no problem using modified thinset everything is in order.My layout for the walls is an intricate designfrom bottom up with 12x12"s /border(4x12)" diagnol 6x6" another border of the same ,capped...

guru, every wall except the ceiling (which is sound and tight fiberboard George Pacific 1/2 sheetrock) the old ceiling was just drywall with mastic!. it was solid during my demo!. I know this ...

I am tiling using 6x6 itailian porcelian onto a 1/2 GP fiberglass moisture/mold resistant drywall.. double drywall ring nailed 16" oc with a drop light centered in the drop celing.. would it be...

I'm about to build a custom tile shower pan using mortar.. I'm using the kerdi membrane shower kit without the kerdi tray because the existing pvc can not be moved center ( about 3" off center.. so...

Jazz, you were right, I called hardie tech support ( not using hardiebacker on the walls.. just for a skreed and the curb.. I'm going to now do the traditional mortar bed route.. receive my mortar...

[QUOTE=;][/QUOTE If hardiebacker is not recommended, how do you form for a mudfloor? Still need four lower support! Especially not using a pan liner! I know I can drywall the alcove all the way...