Search:
Type: Posts; User: sillyxone
Search:
Search took 0.00 seconds.
-
The problem was the relay that control the induced blower, it's too old and keep getting stuck. I read the diagram but it's not there, but I should have thought of it. Anyway, every time it happens,...
-
I was so stupid, the settings on the limit switch must be the lower limit for the main blower to stop running. I should have set it to lower number so that the induced blower don't have to do the...
-
thank you so much
I removed one of the wire from the limit switch, the burner fire up as normal except the main blower doesn't run while the inducer blower does run.
When I turn off the...
-
Hi,
My furnace recently starts acting weird. After running up to satisfied temperature, the thermostat stops normally, then the blower stops 30 seconds later as usual, but the draft motor...
-
I did a little experience last week and record its behavior, here is what I know so far:
When I turn the thermostat to cool (desire temp is 6 degrees lower than room temp), the condenser run for 5...
-
Hi,
When I switch my thermostat to cool, the furnace fan runs as long as I keep setting at cool, but the condenser stop after about 30 minutes. The fan switch on the thermostat set to Auto.
...
|