Search:
Type: Posts; User: jmfp702
Search:
Search took 0.00 seconds.
-
I just put new batteries in the calculator and I push the powert button and nothing? Is there anything else to check out?
-
My backlight went out on my sony vio pcg-974L is there a way to repair this without having to replace the whole screen?
-
On a older technics tuner for house components when you adjust the volume and it crackles they say it is a "dirty switch" is there any way to fix this problem without having to track down parts for...
-
I have two old square trays about five inches square I believe from the pitsburg rail road company. They were made by the international silver company and the only markings on them are (968) not...
-
This daewoo here has a short somewhere? No gages work, but the windows,locks,and now the fuel pump has stopped working? Could there be any relation?
Daewoo nubria
-
This daewoo here has a short somewhere? No gages work, but the windows,locks,and instrument panel does now the fuel pump has stopped working? Could there be any relation?
Daewoo nubria
-
If you have aftermarker wheels try going to a store or online try hub cap annies they usually know where to find it if they got is but you need to know who manufactures the rim
-
I am not positive on this but a good place to start is go in and get your catilytic converter checked it might be plugged
-
Check on your air tube between the air box and the throttle body, should be there a black box with a couple of tiny bolts I think they might be torx, be careful tiny bolts like to break or strip,...
-
Is the pedal going (to the floor) or just (Lower than it should) the squeeking can be from cracks in the pads, or glazing on the pads, and it can be caused by overheating of the braking system...
-
My suggestion to you is to find tekonsha online and see if there is a wiring schematic you can look at and then do it exacly how the manufacurer suggests
-
Well I guess if you go to a brake shop unfortunately unless you can trust them you really don't know what you are getting, however when you are purchasing just ask the guy what does the car call for,...
-
Replace the spark plug seals on underside valve cover, bbefore hand you could take a little brake cleaner spray it in the holes and hold a rag over the holes and blow air in the hole most of the oil...
-
I have a 1994 explorer and the brakes seem to be working fine, but every time you eccelerate from a complete stop when the speedometer hits 15mph exactly it pops the abs light on? Could his possibly...
-
I got a 1987 ford 302 engine here with a upper intake from a more new 302 H.O. can someone tell me where the 6 different vacuum inlet/outlets go to so I can hook them up properly?
Also the pcv...
-
If I were to forget to unhook the battery when pulling distributer what are all the possibillities I could short out?
Or how could I find my timing mark again so I know the car is on time?
-
OK, I pulled the distibutor off to get at the heater hose, then I go to put the distributor back on and now it won't start what could I have mixed up that I did not notice?
|