Search:

Can a 240V item trip the main breaker and not trip it's own breaker? I've got a 240V industrial fan connected to a separate breaker in my 100A panel.

I want to switch the fan and the pipe, but if it's not a big deal to leave the 3" pipe, then I'll just get a 4x3 reducer and install at fan. With the 3" should I worry about not pushing enough air...

I've got an existing 3" dia bathroom fan vent going through the roof. I want to switch it to 4", is it advisable to have a reducer (4x3) to connect to the exhaust at the roof end?

What do you mean by outlets being fed from another circuit?

I'm doing construction on my house and I thought I had the breaker off to two of the outlets but they weren't according to my contractor. The panel indicated that one breaker was for the exterior...

Regular wall outlets on 15A breakers

Why does some of my outlets have 2 breakers tied into them?

I'm adding a sunroom right beside my kitchen which doesn't have a return air. The sunroom is open to the kitchen

Does each room that has forced air must have a return air?

So you are saying that my 2 pole breaker is actually supplying 15A to each pole, correct?

If it's a 15A breaker then why do the poles each provide power to different items?

I've got a breaker that has two switches and each switch has a marking of 15A. Does that mean it's a 30A breaker or it's a 15A breaker?

I want to add a light, switch & receptacle at a end of line receptacle. How do I got about it?

Others are saying that there isn't much for expansion for net and there's not enough assets. Also I 've heard from people that it's a different ratio for service type business. Is that true?

I switched him to Innova and again he wouldn't eat. I'll put out the Hills and he downs it within a min. I guess I'll keep feeding him the Hills. I think he likes the Hills because it has a stronger...

I'm about to list my massage therapy clinic for sale and I'm looking for ideas on how much I should start at? The annual net is $45k. Clinic has 3 rooms and no other expansion is possible. It...

He had no negative effect. I went with Hills Scientific diet, but I just noticed it has corn as the first ingredience.

I'm changing my 7 month old Bichon to a more high quality dry food. Since Thursday I've been mixing a bit of the new food in, but he picks the new food out and leaves the old behind never coming back...

I wouldn't put that past them. Whiner's will be whiner's. Thanks to all the thoughts rec'd.

That's what my lawyer said and she said good luck to them.

No, they did not have a home inpection done. I also told them they were working fine before they took possession, plus it's been 15 days since they moved in.

Doors were working fine before they took possession. How many days do you think I'm responsible for the house after the sale?

Can a buyer take legal action against a seller after 15 days of possession? They are saying the interior doors do not close properly and nothing was written in the contract regarding working doors....

Thanks to all. I used a closet extension kit and it is a success.

Thanks joypulv. Can 2 wax rings work to?

I'm about to install a toilet in my basement and the closet flange is uneven. The floor is concrete. One side of the flange is above grade and the otherside sits approx 1/4" below. How can I solve...

I'm about to install a toilet in my basement and the closet flange is uneven. The floor is concrete. One side of the flange is above grade and the otherside sits approx 1/4" below. How can I solve...

Yeah I chipped away the concrete around the drain pipe for the drain assembly. Wasn't to bad, it only took approx 1/2 hr. Thanks for the input

How does one install a neo angle shower base in a basement? I'm having difficulty understanding how the drain is put together. I've got a 2" pipe coming up from the floor. The instructions state that...

See attached sketch

Sorry, I'm lost. Anyway I can incl a sketch here to show you what I've got

Oh, okay. I'll check it out. On my original question, what do you suggest?

No, but here's a question for you. If I go with a fan/light combination, can only the light go on?

I've got power coming into the light box, then pwr to the light switch, then to outlet. Therefore I've got two wires in each.

I want to add a exhaust fan with a switch to control it in my basement washroom. Currently I've got a light, switch & outlet on this breaker all working properly. Nothing else tied in. How do I tie...

creahands,

What if I wanted to add another outlet (not GFI) ?

Thanks

I'm in the midst of adding a bathroom in my basement and I want to add a light, switch & outlet. How do I wire all three? I want to take them off the main box as I have a extra breaker that is not...

I'm just going to close up the window as it's not a egrees window anyway. Does anybody else have ideas for me ? How about chaulking the heck out of it ?

I have a window in a basement where water is intruding in between the top of the foundation and the bottom of the window. There is a window well outside and it's filled with water. I even have one of...

Can new vinyl flooring be installed over old vinyl flooring ?

It's above my store front. About 8' above ground

Is there a quick way to know which ballast is bad ?

My Fluorescent sign just went. I've 2 signs tied in together some how with a total of 4 ballast. One of the signs has been out for awhile and I've been running only one of them. The 1st thing I did...

Worked. Thanks guys

Actually one of the black wires coming off the dimmer is going in on the right side of the switch. The other black wire is going to a common black

I want to convert a dimmer switch to a single pole switch. How do I go about it ? I've got 3 lines coming in the box. See pics

Thanks to all.

I don't need the 240v anymore for the laminate machine. It has been removed.

Thanks to all.

I don't need the 240v anymore for the laminate machine. It has been removed.

I'll change to a 15A breaker.

I've got a 2 pole 15A breaker in my existing panel with wiring to a laminate machine only. I've added additional 2 outlets, light & light switch with 14/2 wiring to the same breaker and my light and...