Ask Experts Questions for FREE Help !
Ask
    vdoyle's Avatar
    vdoyle Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 28, 2006, 08:07 PM
    Hot tub plumbing and wiring
    To make a long story short. In the process of my divorce our hot tub popped a breaker and froze up. I had the pump fixed but the person that took everything apart can not remember how to put every thing back together. It is an old hot tub so I can not find a name on it to get any kind of diagram. How would I get a diagram of some kind? Thanks for you help!
    Jamespuck's Avatar
    Jamespuck Posts: 6, Reputation: 1
    New Member
     
    #2

    Jan 12, 2007, 07:39 AM
    I am a spa tech in Mass. With a lot of experience with older spas. In my business you usually need a knowledgeable tech take aparta spa pack. If you did not mark and number wires and contacts you need a good tech to solve problem, I have some old spa wireing schmatics if you know the spa pack manufactuer.
    truckman3287's Avatar
    truckman3287 Posts: 1, Reputation: 1
    New Member
     
    #3

    Apr 4, 2011, 03:19 PM
    I have a 1990-1993 hotspings hotub with a wiring promble I a wiring diagram in in the control box.david boyle [email protected]
    kendal_emery's Avatar
    kendal_emery Posts: 1, Reputation: 1
    New Member
     
    #4

    Jul 2, 2012, 01:08 PM
    Do you have a wiring diagram for a spa pak international 0-00-1h? Email it to [email protected]

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring Hot Tub and using a 50 Amp Double Pole GFCI Circiut Breaker [ 10 Answers ]

:confused: I keep getting the GFCI breaker tripping after wiring my hot tub. I wired 2 hot Red and Black to the proper terminals and the White to the neutral and the Bare Copper to the ground Post at the tub. I am using 6-3 w/G per instructions. Could the GFCI breaker be bad? When I wire...

Hot Tub wiring [ 2 Answers ]

I installed a gfi breaker at the main box but wanted to double check my work. The neutral white wire from breaker goes to the ground bar. But does the solid copper ground lead go their also? Thanks

Hot Tub Electrical Wiring [ 1 Answers ]

I am getting ready to install a Dimension One spa that the manufacture calls for using #6-3 awg wire and 240 Volt - 50 Amp with a GFCI breaker and disconnect. I had the house pre wired for a hot tub and 240 Volt service. They installed a 50 Amp breaker in the main box and ran about 40...

New plumbing for whirlpool tub [ 3 Answers ]

We just installed a whirlpool tub. We put all new plumbing in for the new tub and now we are having trouble with the water pressure on the cold side. Anyone have any answers?? Thanks

Adding plumbing for tub/ toilet to home [ 1 Answers ]

We have an older farm home and are doing some remodeling and wish to add a toilet and a tub to our existing laundry room which consists of a concrete slab. What ideas do you have as to the plumbing applications that we could use to make this work? All the plumbing pipes are in the main portion...


View more questions Search