My well pump seems to be cycling on and off more quickly then ever. I have a Square D Pumptrol. It cycles on at 40 and off at 60 which is what it is rated to do. However it cycles on and off every 2 seconds when water is in use.
Add your answer here.
Check out some similar questions!
Heat pump cycle time [ 1 Answers ]
My Goodman heat pump cycle time is approx. 30minutes to raise the temperature from 67 to 68 degrees. We have an insulated concrete form house and it is well insulated. Is this cycle time excessive? Is there any way to adjust these cycles?
My heat pump AC works but not on heating cycle [ 2 Answers ]
I live in a 2-story house in AZ and there are 2 Lennox (sic?) heat/AC pumps, one for each floor... it has 2 Honeywell TH8000 thermostats. Last winter there wasn't any problems but tonight it started getting cold so I turned it from cool setting to heat, I can hear relays in the TS click and it says...
Heat Pump defrost cycle [ 1 Answers ]
Hopefully my question isn't redundant. Earlier this year I changed my thermostat from a manual to a programmable thermostat. The cooling and heating aspects seem to work fine but I have noticed that during the defrost cycle the aux heat doesn't appear to come on since I changed the thermostat. ...
Heat pump blower does not cycle off. [ 4 Answers ]
My problem I believe is with the blower control on a heat pump. With the thermostat in COOL or AUTO, the outdoor unit stops as expected when the temperature setpoint is reached. But the blower does not stop running. It continues to run as if it's in a manual run control. If the breaker to...
View more questions Search