Add your answer here.
Check out some similar questions!
Where can I find smaller than an inch flat irons? [ 2 Answers ]
Hello, I use to to have a 1/2"plates flat iron to straighten my short hair.I went back to the only store that sold them in my area to get a new one because the one I own broke. I ended up buying one that straightens and does curls but it burned my forehead making me look like a dalmatian because...
Need to replace toilet, rough-in 20" from the wall, toilet has four mounting holes [ 3 Answers ]
In a nutshell, we need to replace our existing toilet. However, the toilet has a rough-in of about 20"+ to the closet flange and the toilet has four mounting holes on the base. The toilet is connected to the closet flange via the front two holes (and nothing in the back two holes). I bought the...
9 inch rough in [ 3 Answers ]
Hi, I am remodeling an older home the original owners put an addition on that included a half bath in the new utility room. The rough opening from the sheetrock to the center of the flange is 9 inches without chipping concrete out and putting in an offset. Is there anything else I can do to...
Moving a toilet over an inch. [ 6 Answers ]
I have to move my toilet over an inch away from the wall per inspector's order. The top of the main sewer line is 4" below ground level encased in the concrete foundation with a 4" 90 degree street ell (spg x hub) at the end. The end of the elbow is .5" below ground level. I found an abs offset...
View more Plumbing questions Search