 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Well pump keeps running but no water pressure
HELP I have a problem with my well,no water pressure in the house ,little stream coming out in kitchen,but inground pump keeps running and won't stop . No preasure showing on gauge,I have replaced the pressure switch,pressure gauge,and even put a new check valve on the pipe above ground,its got 220 volt at the switch.
|
||||
Check out some similar questions!
No water pressure
I recently replaced a 1/2 horsepower shallow well pump with a 4 gallon pressure tank. The cut in is set at 30 psi and the cut out at 50 psi. The pressure tank is set at 28 psi. When I turn on the pump it runs and builds pressure to 50 psi and cuts out like it should. The system maintains the...
My well pump keeps cycling with out running any water. I put a new check valve on, but it still keeps cycling. What is my next step?
The water pump to my well doesn't shut off some times. The water pump pressure switch sticks on, either because of the switch or the pressure gauge. If I tap the switch box it will click off. I have shut off the circuit breaker and loosened the nut (on the advice from a plumber). This helps for...
Not sure if I have a bad bladder in my water pressure tank but here is what I have. When my submersible pump kicks on I hear what sounds like water and air mixing in the tank. The house pressure comes up to about 50 PSI and takes time to bleed down. Could I have air in the tank from the well...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
