Ask Experts Questions for FREE Help !
Ask
    SJM-007's Avatar
    SJM-007 Posts: 3, Reputation: 1
    New Member
     
    #1

    Apr 30, 2008, 08:29 AM
    Water Hammer
    Resolution? Why is there an air tank on the water lines?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Apr 30, 2008, 09:32 AM
    Quote Originally Posted by SJM-007
    Resolution? Why is there an air tank on the water lines?
    This is a expansion tank,(see image) They're installed on the cold water line to handle the expansion of hot water when the water system is closed by a check valve or a back flow preventer. If you have a closed system and do not have a expansion tank the expanding hot water will trip the T&P valve on the water heater. Hope this explains things. Tom
    SJM-007's Avatar
    SJM-007 Posts: 3, Reputation: 1
    New Member
     
    #3

    Apr 30, 2008, 09:41 AM
    Water Hammer
    Okay, thanks, yes that explains the air tank.

    However would the functionality of the expansion tank have any effect on a water hammer in the system. When I heard the water hammer before in pipes upstairs, I drained the hot water heater and flushed (50 gallon tank). Noticed deposits of sediment from the tank and possibly the lines, however after I bleed the air out of the pipes the water hammer was gone. That lasted for about two weeks, the water hammer has returned, thoughts??
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Apr 30, 2008, 11:55 AM
    The expansion tank acts like a big air chamber for the system. Its primary purpose is to allow for the hotwater expansion in your heater, however, we also installed air chambers on all our houses since the 60's. You partially recharged the air chambers when you drained the system. Let me show you how to recharge them fully. These air chambers must be recharged from time to time as they load up with condensate. "Water hammer" happens when you abruptly shut off the water. You have at least 40 pounds of pressure pushing the water flow. The weight of the water hitting a 90 degree bend causes the sound that you hear. We put in shock absorbers,(air chambers) to cushion the hammer much like the shocks on your car.
    Back in the 60's we were required to to put shock absorbers,(air chambers) on all bath lavatoies and kitchen sinks. Over time water and condensate built up in them and they must be recharged. First turn off the house at the main house shut off valve. Then open hot and cold faucets at the farthest bathroom to prevent air lock.(This is important.) You will find under each fixture little brass or chrome valves. These are called angle stops. With a small pail held under the angle stop to catch the run off look under the handle of the stop and you will see a nut with the stem running through it. This is called the bonnet packing nut. Put your wrench on it and back it off counterclockwise. Now open the stop and remove the stem and washer assembly, The stop will began to drain. When it has quit draining reassemble the stop and move on to the next one. Do this on each one of your angle stops. There will be six of them in a two bath home. When you are done, close off the faucets you have opened, turn on the water to the house, and give yourself a pat on the back.
    You have just recharged your air chambers and saved yourself a hefty service call bill. Hope this helps you out TOM
    SJM-007's Avatar
    SJM-007 Posts: 3, Reputation: 1
    New Member
     
    #5

    Apr 30, 2008, 02:05 PM
    Water Hammer
    Thanks I will let you know how I do with the procedure. Thanks again

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Hammer on Hot water loop of Steam Boiler System [ 3 Answers ]

We have a steam boiler that provides steam for most of the house but also has a hot water loop for the additions. We have been getting a lot of water hammer and it sounds as if it is coming from the area where the first hot water radiator starts (ie it is from the hot water loop). Does anyone...

Is it water hammer? [ 2 Answers ]

I have a plumbing problem and I have read about water hammer. From what I have read, it seems to happen when you turn the water OFF, but I have the hammering problem when I turn the shower ON. I recently moved into a basement apartment in a home that is about 10 years old. The last 2 nights...

Water hammer [ 2 Answers ]

How do I fix the problem "water hammer"

Water hammer [ 1 Answers ]

What causes water lines to vibrate when no water is being used, taps not being used? It started 2 years ago, only when upstairs bath tub was being used, two days ago it started and vibrates 5 to 7 times an hour.. We may have a water leak behind the bar wall Will take down wall next week.

Water Hammer [ 1 Answers ]

I have what appears to be water hammer in a 18 yr old home. Water arrestors (the blue oil can) are installed. From what I've read, it seems like the solution is to remove the air from the water lines starting with shutting off the main water valve, then draining the pipes. If this is true, then...


View more questions Search