Ask Experts Questions for FREE Help !
Ask
    cpargo's Avatar
    cpargo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 7, 2007, 01:29 PM
    Washing Machine water fountain
    What should I do if the cold water is coming out of the handle of the spigot instead of the mouth when I hook up the washing machine hose and turn on the water? Older home has very narrow water line to the laundry area. Should probably install shut-off valves before the faucets too. Could someone give a step by step or should I call a plumber?

    Thanks,

    C
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #2

    Dec 11, 2007, 08:28 AM
    Typically a leak around the handle means the bonnet nut under the handle is loose. This bonnet nut must be tight enough to not leak but loose enough to be able to turn the handle.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Dec 11, 2007, 09:22 AM
    Quote Originally Posted by doug238
    typically a leak around the handle means the bonnet nut under the handle is loose. this bonnet nut must be tight enough to not leak but loose enough to be able to turn the handle.
    I have added a image to Dougs answer. The bonnet packingnut's located on the stem just below the handle. Just follow Dougs advice an d you'll be fine. Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet closest to washing machine gurgles and backs up when washing machine drains. [ 2 Answers ]

When the washing machine drains, the toilet in the next room gurgles and the bowl partially fills. I have taken these steps: Ran hose down vent pipe on roof. No backup noticed. Had plumber snake from outside wall cleanout by washing machine and 1/2 bath toilet to city sewer line in alley,...

No Hot Water In Washing Machine [ 3 Answers ]

i'm not getting hot water to my washing machine, but everywhere in the rest of the house its fine. What do i need to do?:confused:

No water in washing machine [ 3 Answers ]

Washing machine was working an no water comes in. Anyone explain this?

No water to washing machine [ 1 Answers ]

When we try to run our Smeg washing machine we get an error message that there is no water supply. However, the pipes are all clear and the water is flowing (and the filters are clean). We were told that the circuit board needed replacing. Is there not just some way I could re-set the machine? ...

No water in washing machine! [ 2 Answers ]

Hi My washing machine was working fine, its Simpson Esprit 700, heavy duty. But from last 2 days it can't get any water from hose when I turn it on.I hear the motor is running and there is water on the tap and the hose is not clogged.For some reason the machine is unable to get water inside. Any...

View more questions Search