 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tub spout removal instructions won
Old shower diverter spout. No allen screw at all. I got the spout off because it was corroded through. Had to saw off the pull handle to do it. Now I have the plastic piece that mounts to the pipe on the pipe (still no set screw). OK when I rotate it counterclockwise it still won't come off. Its loose on the pipe like there's rubber holding it on and I can't pull it from the pipe. Help!
|
||||
Check out some similar questions!
I'm trying to replace my tub down spout. I bought a iniversal fit on eand then took my old delta spout off only to find what appears to be a brass barrel about 2 inches long with the seal on one end and treads for screwning the splout on the other it appears to sweated on Is it? Can I heat it and...
Do I have to install the tub spout portion of a tub/shower trim package?
I have a slip on tub spout that has no diverter. I would like to exchange this tub spout with one that has a diverter.
I have a tub spout diverter that has a hole in the bottom. I need to know what the mechanism looks like so I can figure out how to remove it and then unscrew it to put on a new one. There is a hole in the bottom of the unit but it is too close to the wall and I can not look in it to see what...
The diverter on our tub is failing. It diverts about 2/3 of the water so I want to Change the spout. It is a screw on type with copper supply line. As I tried to Unscrew the spout the copper supply line began to twist. I could see the pipe Deform. I stopped not wanting to break off the...
View more questions Search
Add your answer here.
|
