Check out some similar questions! delta faucet tub spout installation instructions [ 1 Answers ] I'm trying to replace my tub down spout. I bought a iniversal fit on eand then took my old delta spout off only to find what appears to be a brass barrel about 2 inches long with the seal on one end and treads for screwning the splout on the other it appears to sweated on Is it?? can I heat it and... Do I have to install the tub spout with a tub/shower set? [ 1 Answers ] Do I have to install the tub spout portion of a tub/shower trim package? Can I replace a slip on tub spout with no diverter to a tub spout with a diverter? [ 1 Answers ] I have a slip on tub spout that has no diverter. I would like to exchange this tub spout with one that has a diverter. Removal of tub spout diverter with hole underneath [ 1 Answers ] I have a tub spout diverter that has a hole in the bottom. I need to know what the mechanism looks like so I can figure out how to remove it and then unscrew it to put on a new one. There is a hole in the bottom of the unit but it is too close to the wall and I can not look in it to see what... Screw-on spout removal [ 2 Answers ] The diverter on our tub is failing. It diverts about 2/3 of the water so I want to Change the spout. It is a screw on type with copper supply line. As I tried to Unscrew the spout the copper supply line began to twist. I could see the pipe Deform. I stopped not wanting to break off the... View more Plumbing questions Search |