Add your answer here.
Check out some similar questions!
Offset Closet Flange for Cast Iron? [ 6 Answers ]
Hi, My cast iron waste pipe centerline is 11 inches from the finished wall. It worked with my old toilet (since disposed of) but won't work for my new Kohler. Is there an offset for cast iron that is easy to install? BTW, the floor was tiled and the old closet flange had an extra flange as a...
Standard or oversize toilet wax ring [ 1 Answers ]
How do I determine whether I need a standard toilet wax ring versus the thicker wax ring? Is there a gap distance that would suggest one over the other. I installed tile and now have a 1/2 inch gap between the flange surface and the floor (tile) surface.
Installing offset toilet flange [ 1 Answers ]
The 2x10 floor joist in right in the middle of where I want the center of the flange to be, how much of the floor joist can I legally remove so the offset flange will fit?
Offset cast iron toilet flange [ 3 Answers ]
I am remodeling an early seventies ranch built on slab. One bathroom has an offset flange of cast iron. There is only one t-bolt slot, located on the offset side. There is no place for a t-bolt on the 'close' side. The flange does not appear to be damaged, although there was a lot of rust that I...
Offset Closet Flange Installation [ 1 Answers ]
Installing a toilet in a new basement bathroom. Center of 4: PVC drain pipe is 13.5" from the wall, so I tried to use an offset flange, made by Oatey Caspers. It was a snug fit, so I did some sanding with sandpaper and emery cloth, applied the cement and tapped it down, but could not get it in...
View more Plumbing questions Search