Ask Experts Questions for FREE Help !
Ask
    callawayx460's Avatar
    callawayx460 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 12, 2007, 12:24 PM
    Symmons shower valve problem
    Hi, I put a new shower dial and handle kit on. When removing the old handle the stem snapped. It is a symmons. I went to the plumbing store and got a new one. I put it in and now have no hot water or so little it feels cold. This may sound dumb but my hot water flow in all sinks is low pressure now. Thanks
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jan 12, 2007, 01:51 PM
    Have you checked the aerator screens on the sinks to make sure they're clear? Cheersw, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replace shower Plumbing Valve assembly shower head 2 knobs [ 3 Answers ]

In a fiberglass corner shower shell. What I have is an old leaking rusted Shower valve assembly. It leaks from the Shower head that is a hand sprayer with a wall mount from the sprayer. It also leaks around the both the hot and cold water wall mount knobs. The cold water knob the sleeve that...

Shower valve [ 1 Answers ]

I have a Moentrol single lever shower valve and only hot water is working. No cold water. The valve is 19 years old. What can be done short of replacing the valve?

Replaced Shower valve problem [ 2 Answers ]

This SHOULD have been simple... I replaced HOT and COLD valves and the DIVERTER on 2 showers. They were old and needed to go. Great care was taken to match and get the proper replacements. The COLD on each shower works well. The HOT leaks out the center post a bit in each shower. The...

Symmons Temptrol Shower/Tub Handle - [ 1 Answers ]

I printed off the internet the part breakdwon to my tub/shower one-dial Symmons Temtrol kit as I am trying to stop a slow leak out oif the tub faucet. I removed the screw and cap - and I can't get the handle off - is it hyst suppoosed to pull off once the screw is removed? That is how the...

Shower valve [ 3 Answers ]

Tom, how are you doing? Can you explain all of the differences to me between a thermostatic water valve and a pressure regulated valve, and which one would be the best to use for my new shower for temp. control. I want to avoid those WOWs when someone turns on water somewhere else in the house....

View more questions Search