Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Stem Placement
[ 7 Answers ]
We are replacing the stems on the hot/cold faucets of our 3 handle tub/shower. We have tried placing the stems facing many different directions, but still we can not get the faucets to turn on and off properly. What are we doing wrong? No directions came with the Danco 3S-9H/C stems. Any help...
I have a stem shower and can't get the hot water to shut off
[ 1 Answers ]
I can't get my hot water to shut off in the bath. I believe it's a compression system with a stem.
Hot water stem leak
[ 3 Answers ]
My home was built in the 70's. My guest bath has a shower tub combination. There is a hot water handle, cold water handle and you pull up a diverter on the spout to the tub to send the water to the shower. When I turn on the hot water (knob on the left) water comes out of the spout and water...
Replacing hot water stem
[ 1 Answers ]
I removed the old stem and replaced it with a new one, but water won't completely shut off. What do I need to do?:confused: [email protected]
No water after shower stem repair
[ 2 Answers ]
My shower faucet and handles had some minor dripping problems, so I decided to repair the hot and cold stems (2 handle shower stall). I got a repair kit and replaced the washers and changed the seats, but when I put the stems back and turned the water back on, there is no flow to the shower head!... View more questions Search
|