I have checked the shower head and cleaned the screen. Taken apart the valve and checked the gaskets. Please help, what can I check next?
Add your answer here.
Check out some similar questions!
Hot water in the shower until shower head installed [ 6 Answers ]
I have hot water in all my other faucets/showers. I also have hot water at the particular shower with the problem as long as a shower head is not installed. When I install the shower head, the water is lukewarm. Any ideas for the source of the problem, and how to fix?
Water from my Shower Head [ 1 Answers ]
OK... I have a bathtub spout with a diverter on top. I pull up the diverter and water is diverted to the showerhead. But, when the diverter is down, some water still comes from the showerhead continuosly. I unscrewed the spout to check it. While the spout was removed, I turned on the water and some...
Water not flowing through shower head [ 2 Answers ]
I have moved into a new flat and my shower is not working. There is a cylinder-shaped part between the two taps that I can move up and down (presumably moving it in one direction is supposed to activate the shower) but the water continues to pour out of the bath taps. What do I need to do to get...
Water leaking out of shower head. [ 6 Answers ]
When I pull the diverter valve up the shower works fine, then I push it down I get a continuous stream of water out of the shower head. If I don't turn the shower on it takes about 2 minutes. For the water to get to the shower head while I am filling up the bath. Could this be a bad diverter valve?
No Hot Water in Shower Head [ 4 Answers ]
Hi everyone! I'm at a loss with this one. I have hot water coming out of the bathtub tap when the Moen valve is set to the hot position. However, when I try to use the shower, the hot water coming out of the shower is almost the same temperature as on the full cold setting on the Moen valve. I...
View more questions Search