 |
| Browse | Ask | Answer | Search | Help | Blog | Join/Login |   |
| ||||
| Quote:
I have one that most repair plumbers miss.. Look down at the bottom of the bowl. If there is a small hole, then that is a jet that starts the syphon action. If it's clogged the water will just swirl around and slowly go down leaving solids behind. Take your finger,(UGH!) and run it around the inside of the opening. Over the years minerals build up and cut down on the syphon (flush) action. If it is rough or you feel build up, take a table knife and put a bend in it to get around the curve in the bowl and chip and scrap it clear. Next take a coathanger and clear out the holes around the rim. They start the swirling action. And last, check the water level in the tank. It should be 1/2" below the top of the over flow tube. And speaking of the overflow tube, Make sure the small 1/8" tube from the ballcock to the white overflow tube is connected so it discharges in it and that it's flowing when the ballcock fills. This is what raises the water level in the bowl. For a good solid flush they all have to work together. Hope this helps and thank you for rating my reply Tom
__________________ speedball1 is a veteran expert from AskMe.com. If you would like to tip me please click on my name and profile and if my answer helped, please click on "AGREE/DISAGREE and add a comment Thanks! | ||||
| |
| Thread Tools | Search this Thread |
Add your answer here.
Check out some similar questions!
I read the other postings, and most of the problems came in with old toilets. Mine is brand new (within a year old) and I just moved in to my new place. The condo has 2 identical toilets and the other flushes just fine. I have mimicked the settings of the working toilet and still can't get my...
I have 2 bathrooms both toilets intermittantly over flow or have slow flushing. I've adjusted the water level to the maximun level to make sure the bowl fills quickly, but that leads to it over flowing at times. Sometimes even if a little tp is used it doen't flush until I use a plunger. Any...
I have two toilets in my home, and they flush very slowly. The bowl is first filled with water and then it slowly goes down. The problem started first with one toilet and then it was the other as well. I have put drain chemicals to no avail. I have pumped the toilets many times with no good result....
I appreciate if anyone can give clues on this slow toilet flush problem. When I turn the flush lever the tank is getting emptied filling the pot almost to the brink, then the pot gets flushed very slow. Now the water level in the pot is much lower than what it used to be when the flush worked...
View more Plumbing questions Search