 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Tub Spout Leaks at diverter
I replaced my tub spout which was leaking water when the shower diverter was lifted. The new one leaks just as much. I thought maybe there isn't enough water pressure to seal the diverter. I have another shower with the same spout and it doesn't leak. Could there be a problem somewhere else?
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
:confused: My tub spout is starting to give me problems, I would like to change it along with the taps, but the problem is the previous owner tiled the whole bathroom all the way around the room. Is it possible to replace them without doing some damage to the tiles?
When I run the shower water comes out of shower head and tub spout. What can I do to fix it?
I would like to replace the diverter or spout in my bath tub. The original is the slip on type with a hex screw at the back. The new one is threaded, is there an adapter I can use to make it work ?
How do I remove spout diverter popup Moen to check.Excess water coming from spout in shower mode.
When I pull up my Diverter for my shower, It sprays a lot and cuts down on my shower's stream. So I decided to replace it yesterday. I determined that it is the screw on type and removed it. But when I took it off I noticed that there was a 1/2 inch copper pipe with a 1 1/4 inch thread attached...
View more questions Search
|
