Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Pumps
[ 3 Answers ]
I have just installed a PS150 BOOST pump and PUMPROL points and a PS Controller unit in a Solar array. Cut in cut out pressure is 30/50PSI, this is all working fine the pump is cutting in at the required pressure and cutting out at the required pressure but when the pump cuts out and the points...
Pumps
[ 0 Answers ]
I just installed a 1horse 5 gpm 2 wire pump with all new system. I plugged it in to a generator and it barely got up to 20 psi. I opened the hose bibb at tank and the water only trickled out I bypassed the switch and it did the same thing. The well is 400' deep. Do you think the pump is too weak?
Well pumps
[ 1 Answers ]
When a well pump comes on and off very quickly, this is: A. a long cycle, B. an intermediate cycle, C. a motorcycle, or D. a short cycle
Well pumps
[ 1 Answers ]
Recommendations on summersible well pumps... Goulds or Franklin motors? Thanks
Circulating Pumps - submersible pumps - low efficiency
[ 1 Answers ]
Hello people, Well I was selecting some hot water circulating pumps and submersible pumps, for a rather big project. I consulted GRUNDFOS (can't get bigger than that). For the hot water circulating pumps, Grundfos informed me that the best selection according to my (flow, head)... View more questions Search
|