Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Diverter Valve
[ 1 Answers ]
I was washing the dishes and when I went to press to spray nozzle, no water came out. Then when I went to use the faucet, no water came out as well. I think this may have to do with the diverter in the spray nozzle? What are your thoughts? And how do you remove the spray nozzle?
Diverter valve for Moen faucet
[ 2 Answers ]
Hi, I need to replace the diverter valve (1225) on the kitchen faucet. Do I need to remove the entire faucet to do this? If so how do I do this? Thanks
New Diverter Valve not working
[ 10 Answers ]
Hi, I have read a couple of the threads on diverter valves and thought I might ask this question for some help. Ok here is the background on the problem and how we went about solving it. First this is a house that was built in 1971 so nothing new. The bathroom on the main floor has a three...
Diverter valve problem
[ 1 Answers ]
Hi All, Had a problem with the diverter valve knurled end being worn, so I changed the whole valve(Danco replacement for Sayco). With the new valve, I have low pressure & also when putting water towards the shower head, it still comes out the lower spicket. How does that happen. Thanks in...
Peerless Diverter Valve
[ 3 Answers ]
Is there anyplace on the web that would have an internal drawing of a Peerless single-lever faucer? My diverter valve is sticking, and before I take it apart, I'd like to know what to expect inside. Thanks Jim View more questions Search
|