Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How to remove Temptrol T21-C diverter retainer
[ 3 Answers ]
How do you remove the diverter retainer (T21-C) on the Temptrol Mixing Valve Model A Tub/Shower system. Then I need to know how to remove the TA-25A diverter spindle. Thank you
How can I remove diverter spout?
[ 2 Answers ]
I have read other answers to this question but have not found out what I might be doing wrong. I have a Moen tub & shower spout with a pull up diverter in the spout. I have removed the allen screw and tried to unscrew the spout. After more than 100 counterclockwise turns the spout is no closer to...
How do I remove a Kohler diverter?
[ 1 Answers ]
Hi All~ I've got a Kohler K-169 single-handle kitchen faucet with a dysfunctional sprayer, and I can't figure out how to remove the diverter. I've removed the plastic nut that holds it in, so I can (almost, but not quite) get to the o-ring. Also, any advice on removing the valve would be...
Using wrong tools to remove diverter valve?
[ 3 Answers ]
Hi. I am trying to replace an old (diverter?) stem valve for a compression faucet in my old apartment (I'm assuming that it needs to be replaced because, though both hot/cold shower valves work fine, it's when I turn the shower valve on, water is still running from the lower faucet along with the... View more questions Search
|