Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New plumbing and venting for washing machine.
[ 9 Answers ]
Please take a look at this design and let me know what you think. Please note that the vent and drain stack are on a perpendicular wall. How long can the pipe with the red question mark on it be? To do this I'd need it to be about 6' including the elbow. I'm guessing I'd have to angle it down. ...
Venting a washing machine through an unused furnace flue
[ 5 Answers ]
I am installing a washing machine and laundry tub in the basement and have no way to vent them through the ceiling and up the roof. However, nearby I have an old, unused furnace flue that goes all the way up to the roof. Of course its diameter is more than needed for venting of the washing...
Venting a washing machine properly
[ 1 Answers ]
I need help venting a washing machine properly. We have just purchased a new washer and the current washer we have was never vented properly. So what happens is the water backs up in the vent pipe and also the sink which is on a T refuge pipe. Help Please. Thanks
Venting for a washer.
[ 3 Answers ]
I would like to add a washer hook-up in a utility room that I have. It is on the 1st floor of a 2 story home. Directly above it is a bathroom, so I have hot and cold water lines in the wall. As well as two waste pipes (a 3" from the toilet and a 2" from the sink/shower). I am assuming it is a... View more questions Search
|