Ask Experts Questions for FREE Help !
Ask
    viggo's Avatar
    viggo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 20, 2009, 08:46 PM
    Stanadyne shower valve
    Hi:
    Had a problem with water pressure from the shower head. Lots of pressure from the spout. Ran a snake down the shower pipe to the valve but I think I damaged something in the valve as now when I pull up the diverter in the spout, no water comes out anywhere. Any suggestions. I also can't find the shower cut off valve.

    Viggo
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Feb 22, 2009, 01:08 PM

    Hello Viggo,

    Where did you learn to run a snake down the shower pipe to the valve, sure you have damaged the cartridge, it is a moen shower valve, you need to remove the cartridge and replace , there is no cut off valve, Thanks.

    John
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fix leaking Stanadyne shower faucet [ 5 Answers ]

How can I get to the stem out to replace the washer?

Stanadyne Shower not fully diverting [ 1 Answers ]

Hi all, I've just closed on my first house, and over the past couple of days, I've noticed that in our master bedroom shower, when I pull up the diverter to switch the water towards the shower, about half of the flow continues to go into the bath, while the water that does flow to the shower...

Dripping Stanadyne Shower Valve [ 3 Answers ]

How do I remove a Stanadyne shower valve installed behind a fiberglass shower stall.

Removing screws in old Stanadyne shower faucet [ 2 Answers ]

How do I remove highly resistant screws within an old Stanadyne shower faucet?

Stanadyne shower diverter [ 2 Answers ]

My stanadyne shower diverter leaks. How do I take it apart?

View more questions Search